[Found!] '64-'65 V8 904 & converter

[JD9064]

Looking for 64-65 v8 904 and torque converter for REALLY CRUSTY 64 pushbutton valiant. Has '64 273. Rebuildable core is fine. Also non-pushbutton is fine.

southwest Oregon area.

Thanks FABO.

 

[Locomotion]

904 and if all original, the converter snout & crank register have the early small size which doesn't interchange with any of the newer versions. Gotta match things up.

 

[JD9064]

904 and if all original, the converter snout & crank register have the early small size which doesn't interchange with any of the newer versions. Gotta match things up.

crap, yea. I luckily found a 64 273. so I need the pre '68 converter is what youre sayin?

I'm doin homework. Thanks for the heads up. 273 Torque converter & transmission

 

[grampscamp]

I have a 1964 converter. Works perfect.

 

[cudamark]

'64 904 is pushbutton cable shift with flange output
'65 904 is non-pushbutton cable shift with flange output
'66-7 904 is linkage shift with slip yoke output
All of the above use a converter with the small button.

 

[JD9064]

'64 904 is pushbutton cable shift with flange output
'65 904 is non-pushbutton cable shift with flange output
'66-7 904 is linkage shift with slip yoke output
All of the above use a converter with the small button.

Yet another endless void of mopar knowledge that I didnt know I needed. You're the man Mark.

I have a 1964 converter. Works perfect.

PM me, I'm curious about how much you want and what a shipping estimate would cost. Thanks gramp

 

[JD9064]

Still on the hunt for a 64-65 v8 904 in the southwest oregon area. Thanks fabo.

 

[JD9064]

bump

 

[Moparpuller]

bump

I have a 65 904 no converter. It is located in iowa tho. Probly doesn’t help you out