[WANTED] 65 dart 4-speed pedals & z-bar

[tamanko]

Looking for early a-body 4-speed pedals and z-bar for manual transmission swap on a 1965 dodge dart.

Frank

 

[chryslerfat]

I have a set in the barn. I am just north of Toledo.

 

[tamanko]

Interested - will PM

 

[attenuated]

A set on Phoenix Craigslist auto parts. GLWP

JJ

 

[trapster]

is this for a 65 9 1/2" bell or something different ?

Check brewers if it is not the stock setup.
http://www.brewersperformance.com/4speed.asp

 

[tamanko]

Not certain - how do I tell? Is there a number I should look for to confirm?

OD Transmission and Bell housing are from an Aspen. Engine is a slant 6.

Frank

 

[chryslerfat]

Not certain - how do I tell? Is there a number I should look for to confirm?

OD Transmission and Bell housing are from an Aspen. Engine is a slant 6.

Frank

If you are using an overdrive bell you need the 10 1/2 Zbar conversion for it. Several members here have bought their Zbar and are very happy with it including myself.

 

[chryslerfat]

This is what you need.

http://www.brewersperformance.com/proddetail.asp?prod=TS636

 

[chryslerfat]

This is the ballstud you will need also.

http://www.brewersperformance.com/proddetail.asp?prod=BSB636

 

[trapster]

send an email to brewers and tell them what you have they will send you a parts list of what you need.

 

[65 Dartman]

X2 on the email

 

[gtmopar]

I have the peddles as well but I had converted mine to hydraulic throw out bearing which worked amazing compared to the Z bar. Might want to look into it. Mine was a McLeod.

 

[2-66 Cudas]

I have a set of pedals from a 65 Barracuda. $150 - what I paid for em. Where in Ohio? I drive truck and am in the Cleveland - Lorain - Akron - Youngstown areas every week.

 

[tamanko]

Thanks - found a complete assembly.