[WANTED] 66 A body driveshaft

[searcher1990]

I am in need of a driveshaft for my 66 barracuda.it is a 904 auto and a 8 3/4 rear which has a U-joint width of 3 5/16-ish. Best I can measure since I don't have one is from center of rear u-joint to back of transmission housing is 52 1/2". I live just outside of Portland, Oregon. thanks ahead of time for any help.

 

[chignikred]

Ive know this application to need a 54" shaft.

 

[retrorobot]

Have you checked with Wildcat Mopars?
They're not too far outside of Portland.
https://www.wildcatmopars.com/

 

[pishta]

IIRC a 70-72 Duster with an 8.75 has the same length driveshaft within about 1/2 inch...49.58 is what is listed 66 with a 8.75 rear. Many say that the list is wrong though.

 

[SGBARRACUDA]

I have one that is 51 1/2" center to center with a 904 yoke.

 

[searcher1990]

Have you checked with Wildcat Mopars?
They're not too far outside of Portland.
https://www.wildcatmopars.com/

I haven't checked with them yet. I have gotten some parts there before but its a 2 1/2 hour drive each way so I try more local first. Its a great idea though. i'll give them a call tomorrow. Thanks for the help everyone.