67 Barracuda fender on 68 Barracuda?

[Chained_360]

So the passenger side fender on my 1968 Barracuda is kinda FUBAR'd, and it seems impossible to find a new one. However, when I bought the car, it came with some spare sheetmetal including the passenger side fender from another barracuda. I'm 99% sure it's from a 1967, and I was wondering if it would bolt up and look right on a 68 with a little modification. Here's some pics:

 

[growdude]

A 67 will work on a 68 you just have to cut the round side marker light hole

 

[jimt1971rr]

Also the script markers are in the rear location on the 68. (Behind the wheelwell.) . I would use the old fender to mark and modify the 67 one. You will need to fill the forward script holes as well.

 

[RedFish]

"A little modification" ( taken from another recent thread ) does apply here. Having the 68 fender for guide is a bonus. Happy moparing

 

[Chained_360]

Yeah, I knew by looking at it that the trim mounting points would be different. I guess I was just curious if the body lines/shape will look right.

 

[cawley]

Body lines for a 67,68,69 are the same. They all bolt on the same. The only diff. is where the emblems go on.