67 Dart Bolt pattern

[jaysimonds]

I have 67 Dart slant 6 and need to update rear bolt pattern
to match upgraded disc brakes put on front. Any ideas. Not yet sure of bolt pattern size used on front.

 

[813Demon340]

Welcome! Assuming your front end was upgraded to 4 1/2" bolt pattern and the rear is the 4". Depends on what rear end your car has, if its an 8 3/4 (drop out center section like a 9"Ford) you can upgrade the axles, or have them redrilled. You can redrill the drums or upgrade the brakes from a B/E body. Theres lots of info out there on the internet.

 

[Abodybomber]

Welcome, lol.

 

[jaysimonds]

I have the 7 1/4" rear. I am going to try and have the flange and drum redrilled, should that work on the 7 1/4" rear axle? Figure i should have old holes filled in, will be done by a professional machinist.

 

[70Barcuda]

Welcome.

 

[hemidart67]

Why dont you look for a factory large bolt pattern 7 1/4?Guys are just literally throwing these away.

 

[pishta]

Drill and fill, been done but lbp axles can be bought/asked for and will bolt in too. Upgade to 67 disc brakes and you csn keep your sbp.