[WANTED] 68/69 dart fenders & bumper brackets

-
Status
Not open for further replies.

TJR

Member
Joined
Oct 24, 2021
Messages
8
Reaction score
2
Location
Antelope valley
Rating - 0%
0   0   0
Contact seller
Like the add says I need 68/69 front fenders.. Side marker lights will be shaved so I don’t care which year .

I don’t need front bumper brackets . Just bought a set from a member here
 
Last edited:
It will depend on what grille you intend to use. '69 fenders have different mounting points for the grille, in addition to the headlight spacing being different. '67 & '68 should interchange iirc, but '69 fenders have to use the '69 grille & headlight bezels.
 
67 68 and 69 all have different spacing on the headlight buckets. I have the bezels and proved it.

69 is on top of 67
PXL_20210207_213130646.jpg


69 is on top of 68
PXL_20210207_213108419.jpg


67 on top of 68 (really close)
PXL_20210207_212906136.jpg
 
Last edited:
Thanks everyone. If that’s the case I need 69 fenders. I’m converting a 73 front end and would rather not move the headlight buckets if I don’t have to .
 
Last edited:
I’m converting a 73 front end and would rather not move the headlight buckets if I don’t have to
You should check fitment of the bezel before you buy fenders, i have a 72 73 74??? fender on my 67, the bezel holes dont line up but the bucket is close enough to fit.
 
You should check fitment of the bezel before you buy fenders, i have a 72 73 74??? fender on my 67, the bezel holes dont line up but the bucket is close enough to fit.

I just had my nephew measure his car. Headlight buckets are the same width on his 68. When I mock up with 69 grill the headlight buckets are not centered (they need to move inward 1in each side)

if I can’t find 69 fenders I’ll move the headlight buckets .
 
You could go with 67, the grill has the same retangular shaped turn signals and the bezels might fit without mod
 
Status
Not open for further replies.
-
Back
Top