68 Barracuda Notchback Deck Lid Mounting Hardware

[tlmw94]

Hi All, looking for mounting hardware for the trunk lid on my 68 barracuda. I have the hinges, just not the hardware to mount the deck lid to the hinges.

I found these online, but not sure if they are correct? Does anybody know if these would work? If not can anybody point me in the right direction?

http://www.2040-parts.com/mopar-a-b...-valiant-trunk-lid-decklid-brackets-i1986865/

 

[1969383S]

Sound like you just need the correct mounting bolts yes?

 

[tlmw94]

Sound like you just need the correct mounting bolts yes?

Well the hinge is not threaded and the deck lid is not threaded, so I would presume there needs to be some sort of bracket that goes into the hole of the deck lid with the end of the hinge? I don't see how a regular nut would be tightened without it being on some sort of bracket. But I could be way off here so please excuse my ignorance.

 

[1969383S]

My 69 units seemed to be captured. Just like the hood.

 

[4spdragtop]

Heres from my 69 FSM.

 

[RedFish]

The parts you linked that slide into the hinges look correct but barracuda isn't listed. I dont know if the bolt spacing in barracuda hinges is different from those other a-bodies or not. Maybe email that vendor and ask for bolt center to center measurement, or just buy used from a barracuda. @barracudakid

 

[barracudakid]

I have OEM fasteners