68 tran wiring

-
Status
Not open for further replies.
Correct for 68 would be a single brown wire running from start relay to neutral safety switch.
 
RedFish said:
Correct for 68 would be a single brown wire running from start relay to neutral safety switch.
Click to expand...
That's true in almost all cases but I've seen a few real late '68 models with the 3 wire setup. If he has this type, we'd need to know if it's a 2 speed or 3 speed wiper car as the harness is ganged together with the firewall harness and/or wiper motor harness.
Thanks, Mark
 
like this?

DSCN2996.JPG
 
when i bought the car it had nothing.
i have the brown wire.
i have a 3 prong ns switch.
if i get an older backup switch where does the other wire go?
i have no wipermotor on yet, i have a 2 and 3 speed motors.
 
mxlplx71 said:
when i bought the car it had nothing.
i have the brown wire.
i have a 3 prong ns switch.
if i get an older backup switch where does the other wire go?
i have no wipermotor on yet, i have a 2 and 3 speed motors.
Click to expand...
If you have a one-wire car and a three-wire transmission, just connect your brown wire to the center pin of the neutral safety switch. You can't just swap the switch with the one-wire one because the rooster comb inside the trans is different.
Thanks, Mark
 
thanks cudamark ,,you just saved me alot of time and some money.
 
Status
Not open for further replies.
-

Back
Top