69 340 Dart Suspension Parts & 8 3/4 Pumpkin

[blewbyoutobad]

69 Dart complete front suspension $300.00
Steering Box, Control Arms, Sway Bar, Brake Drum Assys, Spindles. K Member
Ball joints good, Need bushings
These are factory parts from my 69 340 Swinger.

Large Rear Drum Brake Assys, Std on 340 $100.00

Small Bolt Pattern Axles 8 3/4 $100.00

742 8 3/4 w/ 4:56 Gears, All new, Limited Slip $500.00

Have pics of parts not in pictures
I can crate or use heavy boxes for shipment. Buyer pays freight
I accept Pay Pal
Parts located in Missouri City TX

 

[blewbyoutobad]

I am open to any reasonable offers, all or part.

 

[dustoff440]

If you part I could be intersted in the torsion bars if they are original 340 bars

 

[blewbyoutobad]

Sure I'll sell them. They are the same bars that have been in this car since I bought it in 1974. The car has probably sat for at least 30 years, inside most of the time. Make me an offer. I'm not sure what they are worth.
Randy

 

[blewbyoutobad]

The steering box is manual for the party that asked.

 

[blewbyoutobad]

Still have front suspension parts available.

 

[blewbyoutobad]

Still have K-member, torsion bars and front suspension, drum brakes. All from 1969 340 Swinger. Third member sold. I also have rear leaf springs

 

[Larrymc]

are you interested in selling the hubs? left front especially

 

[blewbyoutobad]

Larry
I'd rather sell as an assy for someone converting a 6 to an 8. Do you want both hubs or just one?
Randy

 

[dart6]

what size are the front drums and size of the rears thx

 

[blewbyoutobad]

I'll look tonight, I think I may have sold the rear but I'll confirm sizes which are factory small bolt pattern 340 Swinger drums.

 

[dbphemi]

Do you still have the rear leaf springs?

 

[themaker]

do you still have the front suspension stuff?

 

[Larrymc]

I am still interested in your front brake assemblys,how much are you asking?are both hubs included?

 

[Larrymc]

would you accept 125.00 for your hubs drums,spindles ? thanks Larry

 

[blewbyoutobad]

Sorry for not replying guys, I have been out of town. I have the springs and am working with dbphemi if the part#'s work out for him. I had a PM on 6/20 at 9:10AM for the lower control arms. I want to sell it all as an assy so if the first buyer is not interested in all of it, I will contact themaker first and LarryMC I will contact you next if themaker does not buy. Once again guys sorry for not getting back to you sooner, life gets in the way sometimes.
Randy

 

[blewbyoutobad]

Everything is sold except the K Member

 

[moparman3211]

what about the axles do you still have them

 

[67cudafb]

Do you have more pics of K frame. What is price with shipping to 32656? Thanks Bill