d55dave
Well-Known Member
I am considering selling my 69 Barracuda race car project. It has most of the Chassis work completed. Here is a list of what has been done and what is included:
One piece fibregalss front end
AAR fibrelgass trunk lid
AAR fibreglass rear bumper
custom fabricated Chassis
Mustang II based front end with rack & pinion steering
New 11" rotors with adapters for camaro/S10 calipers
10 point cage
engine and drivers seat both set back 10" or 12" from stock
Dana 60 differential - narrowed and hung on SS springs - this is a factory car rear, narrowed and with drum brakes, I think 5.38 gears
Wheel tubs installed
fuel cell mounted in trunk
400 core engine
early 70's big block 727 heavy duty - should have all the good factory bits
quick disconnect (removable) steering wheel
centerline wheels - 15X12 rear and 15Xskinny fronts
Goodyear Eagle 32X14 slicks
custom headers with 2 1/8 primaries - will need some changes to fit this car
Fresh converter - I think 3500, I will have to check
68 and 69 taillights - both sets in rough condition, but OK for a race car
drivers seat installed
holley 750 double pump with 50 cc pumps
Definitely some assembly required! Car needs to have a firewall fabricated, windows installed, and all plumbing and wiring.
Located in western Canada, I can arrange shipping to Vancouver or the BC/US border for a reasonable fee.
Asking $3250 obo
pm me for more information
One piece fibregalss front end
AAR fibrelgass trunk lid
AAR fibreglass rear bumper
custom fabricated Chassis
Mustang II based front end with rack & pinion steering
New 11" rotors with adapters for camaro/S10 calipers
10 point cage
engine and drivers seat both set back 10" or 12" from stock
Dana 60 differential - narrowed and hung on SS springs - this is a factory car rear, narrowed and with drum brakes, I think 5.38 gears
Wheel tubs installed
fuel cell mounted in trunk
400 core engine
early 70's big block 727 heavy duty - should have all the good factory bits
quick disconnect (removable) steering wheel
centerline wheels - 15X12 rear and 15Xskinny fronts
Goodyear Eagle 32X14 slicks
custom headers with 2 1/8 primaries - will need some changes to fit this car
Fresh converter - I think 3500, I will have to check
68 and 69 taillights - both sets in rough condition, but OK for a race car
drivers seat installed
holley 750 double pump with 50 cc pumps
Definitely some assembly required! Car needs to have a firewall fabricated, windows installed, and all plumbing and wiring.
Located in western Canada, I can arrange shipping to Vancouver or the BC/US border for a reasonable fee.
Asking $3250 obo
pm me for more information
