74 Plymouth Duster V8

-
Status
Not open for further replies.

MoparBill_TX

Member
Joined
Jul 28, 2011
Messages
17
Reaction score
0
Location
North Richland Hills, TX
Rating - 0%
0   0   0
Contact seller
I have a 74 Plymouth Duster, 360/727, Tan w/ tan, white and striped interior, I'll post interior pics tomorrow. This car does not run, and the brakes don't work, calipers in trunk. Car needs some work, has been sideswiped on the passenger side, but is pretty solid. The right leaf spring is bent, and the right quarter is in dented pretty bad, rear bumper is twisted and both rockers have rust, but those and the driver's floor are about it on the rust. I DO NOT have the title. Selling whole it AS-IS for $1500, or will part it out. I'll get some better pics when I get it off the trailer.
Thanks


Edit: Factory 318/auto, power disc brakes, 8 1/4 rear I'll check for a tag tomorrow, factory A/C, but the compressor and condensor are gone.

IMG_20110728_203613.jpg


IMG_20110728_203721.jpg


IMG_20110728_203730.jpg


IMG_20110728_203823.jpg


IMG_20110728_203842.jpg
 
Door panels, have all 4, not perfect, may be easily repaired.
Few more pics, bit smaller this time. I'm not sure if the motor runs, or how long it had been sitting, I was planning RB swap. If anyone wants other pics PM me, thanks

I can deliver, or meet within 150 miles or so of the DFW Metroplex. If no serious offers on complete car I'll start parting it.

IMG_20110729_133859.jpg


IMG_20110729_134123.jpg


IMG_20110729_134134.jpg


IMG_20110729_134142.jpg
 
Parting the car, all parts O.B.O.

Spool mount V8 K frame $125

Front disc brakes: calipers, rotors, spindles & UCA's complete $200

8 1/4 Rear 2.45 ratio complete drum to drum w/ E brake cables $200

Good front fenders, small dents and dings $175ea.

Decent doors, D/S has tint, P/S no tint $100

Tinted pop out windows $50/pr

360/727, no carb (2brl), distributor, valve covers or accessories $300

Tail lights L pitted, R few pits, lenses good $60/pr

Power booster/master cylinder $125

Prop valve $50

Deck lid, no cut outs $50

Most other parts are still there
Prefer not to ship larger items, can deliver within reason, or meet somewhere.

I WILL BE DRIVING TO SOUTH JERSEY, LEAVING SATURDAY AUG.6, IF ANYONE IS INTERESTED IN ANY PARTS I'M WILLING TO MEET YOU ALONG THE ROUTE, OR MEET WITHIN 50 MILES OR SO OF VINELAND, NJ 08360.
Thanks, Bill
 
If you part it out I'm interested in disc brakes & power booster and master cyl thanks
 
Parting the car, all parts O.B.O.

Spool mount V8 K frame $125

Front disc brakes: calipers, rotors, spindles & UCA's complete SOLD

8 1/4 Rear 2.45 ratio complete drum to drum w/ E brake cables $200

Good front fenders, small dents and dings $175ea. REDUCED $125ea

Decent doors, D/S has tint, P/S no tint GONE

Tinted pop out windows $50/pr

360/727, no carb (2brl), distributor, valve covers or accessories $300

Tail lights L pitted, R few pits, lenses good $60/pr

Power booster/master cylinder SOLD

Prop valve SOLD

Deck lid, no cut outs $50

Prefer not to ship larger items, can deliver within reason, or meet somewhere.
CAR IS SCRAPPED

I WILL BE DRIVING TO SOUTH JERSEY, LEAVING SATURDAY AUG.6, IF ANYONE IS INTERESTED IN ANY PARTS I'M WILLING TO MEET YOU ALONG THE ROUTE, OR MEET WITHIN 50 MILES OR SO OF VINELAND, NJ 08360.
Thanks, Bill
 
I would be interested in both "A" pillars cut about 8 inches back from the windshield and down to the rocker panel. My car had a vinyl top and it rusted out the "A" pillar on both sides down to the rocker. I can text or email pics of my car so you will know what I need. Also are you planning any trips to central Florida in the near future? I would need them shipped to 33809. Thanks Gregg
 
would you ship the drive shaft to me and at what price!!
No driveshaft sorry
How much for the grill?
the left side of the grille top tab is missing, the right side is cracked one parking sense as a stress crack. Both bezels are in good shape, I'll take $60 shipped
I would be interested in both "A" pillars cut about 8 inches back from the windshield and down to the rocker panel. My car had a vinyl top and it rusted out the "A" pillar on both sides down to the rocker. I can text or email pics of my car so you will know what I need. Also are you planning any trips to central Florida in the near future? I would need them shipped to 33809. Thanks Gregg
email me some pics of what you need. I already cut the roof off of that one BUT, I have another shell I might be able to get that from [email protected]
thanks, Bill
 
Still have the hood? Any signifigant kinks, dents, dings, or Rust...I have a straight one with about 200 hail dings? Are those Autozone Hood Pins?
I am in NM...but have family in Greenville that could pick it up...assuming your not wanting top dollar for it.
 
I have a 74 Plymouth Duster, 360/727, Tan w/ tan, white and striped interior, I'll post interior pics tomorrow. This car does not run, and the brakes don't work, calipers in trunk. Car needs some work, has been sideswiped on the passenger side, but is pretty solid. The right leaf spring is bent, and the right quarter is in dented pretty bad, rear bumper is twisted and both rockers have rust, but those and the driver's floor are about it on the rust. I DO NOT have the title. Selling whole it AS-IS for $1500, or will part it out. I'll get some better pics when I get it off the trailer.
Thanks


Edit: Factory 318/auto, power disc brakes, 8 1/4 rear I'll check for a tag tomorrow, factory A/C, but the compressor and condensor are gone.

IMG_20110728_203613.jpg


IMG_20110728_203721.jpg


IMG_20110728_203730.jpg


IMG_20110728_203823.jpg


IMG_20110728_203842.jpg
Is K frame still available
 
how are the sail panels i'm in need of a set for a 73 duster if you can give me a price with shipping to 07848
 
Status
Not open for further replies.
-
Back
Top