Profyrfyter
Member
Hello all, I am reinstalling the stock A/C system in my 74 Swinger and I need a little help, my Haynes manual isn't much help with this project. I've got all the lines and components installed and pulled a vacuum on the system then when I went to charge it I noticed that it appears wires are missing. There is nothing going to the compressor and the thinner blue wire that's connected to the drier isn't connected to anything. I can't figure out where either of them connect to. Any help would be appreciated! I've included pictures to hopefully help problem.
Thank you in advance!
Thank you in advance!















