76 Dart Uppwe Control arm brackets and shock tower

[76 Dart Dastardly]

Has anyone used these *MM8186 60-76 A-BODY UPPR ARM MOUNT PR from Classic Industries? I need to know where they mount, measurements from the lower frame to the top of the C Arm bracket. I have it tacked in right now but I don't think my measurements are correct. I'm installing the QA1 coil over system and have to replace parts of the frame due to rust. I think my bracket on the rear arm is too high.

 

[Inertia]

I just finished doing that job on a 67 Barracuda.

I have the rotten stuff I pulled out, I,ll see if I can find it
I have some pix in another recent thread that might help .

 

[Inertia]

Replaced rotted front frame rail and alignment anchors w pix .

I posted some pix in a thread, but thought I'd put up a header making the pix easier to find. This car came to me trying to avoid the crusher, as it had been condemned by an alignment shop. It wouldn't hold an alignment, kept pulling different ways, visible toe-in changes . The car had...

www.forabodiesonly.com

 

[76 Dart Dastardly]

http://[URL]https://www.forabodieso...rame-rail-and-alignment-anchors-w-pix.581604/

[/URL]

I think I'm high on the rear C Arm bracket. I'm trying to find the measurement from top of the C Arm Bracket to the bottom of the frame

 

[Inertia]

I'll see what I can do.
Might be tmrw, just a min, have a 67 on blocks.

 

[Inertia]

The one marked is 6" ish +- 1/8"
The other is 8 " +-
Not sure pix will be helpful

 

[76 Dart Dastardly]

The one marked is 6" ish +- 1/8"
The other is 8 " +-
Not sure pix will be helpful

View attachment 1716429188

View attachment 1716429189

View attachment 1716429190

Thank you very much!

 

[Inertia]

Your welcome, anything else, ask, cheers
You got a ways to go, here's what mine turned out like .

Refused to re-install motor into Yellow Barracuda with black engine bay !

My parts guy phoned looking for front brake hubs cuz someone ruined hubs pounding out swaged wheel studs. I supplied my last set off hubs, and delivered to the jobber. Looking the Barracuda over, it was pretty nice, shop was doing a number on suspension and brakes, a $7,000 number I later found...

www.forabodiesonly.com

 

[76 Dart Dastardly]

Your welcome, anything else, ask, cheers
You got a ways to go, here's what mine turned out like .

http://[URL]https://www.forabodieso...ellow-barracuda-with-black-engine-bay.581588/

[/URL]

Thats a sweet ride!