[SOLD] 8.75 Sure Grip 489 case 2.94 gears

[dodgedude]

Excellent used condition. 2.94 gears, 4.89 case. Gear count is 47-16. See pictures for condition. It does look like the yoke has been modified to accept thru bolts rather than the small 1/4 inch factory bolts. Can ship at buyers expense. FedEx or Beaver freight if you are in their delivery area. (Kansas, Oklahoma, Parts of Texas and Missouri)

$500 obo plus actual shipping cost. I am not going to use this unit, tired of it sitting around. Have other parts to buy! Lol.

Thanks

 

[dodgedude]

I will do $500 and include shipping to the lower 48.

Thanks

 

[dodgedude]

I have replaced the front yoke (small pinion, corse spline) with one that has the stock bolts and installed a new pinion seal. Unit is ready to install and go.

$500 shipped to you.

 

[63spf]

Shipping to Hawaii ? 96750

 

[dodgedude]

Shipping to Hawaii ? 96750

Please provide complete address so I can check different carriers. Any idea who would be best for an item this heavy?

Thanks

 

[dodgedude]

So at 75 lbs, Fed Ex is showing 248.00 shipping ground. Any thoughts for economy shipping?

 

[63spf]

so with the shipping cost at 248 ,What's the best deal you can give me on the unit ?

 

[dodgedude]

PM Sent

 

[63spf]

Pm'd back

 

[dodgedude]

You have a new PM. Found shipping that will work for the price you offered. Thanks

 

[whitepunkonnitro]

Not to hijack anything, but I ship center sections all the time.
If you pop the carrier and pinion out, you can ship in two large USPS flat rate boxes, and total shipping to Hawaii would be $40

 

[dodgedude]

I would be willing to do that if it's ok with buyer. Then we could do $500 shipped.

 

[63spf]

I have $450 in account rt now. If willing, I will send that . Its all I can spend on it .

 

[whitepunkonnitro]

There is a very specific way that the housing needs to be packed into the box in order for it to meet the POs requirement as far as "bulge" goes.
I can walk you through it if need be

 

[dodgedude]

There is a very specific way that the housing needs to be packed into the box in order for it to meet the POs requirement as far as "bulge" goes.
I can walk you through it if need be

I may get in touch for packing help. Thanks.

 

[63spf]

Many Thanks "WPON" we will be in touch , Mahalo C