90 degree oil filter adaptor

[Bobacuda]

After looking at clearances with the traditional oil filter, I decided to use a 90 degree adaptor. The traditional filter has a plate attached to mount the filter, do l leavevthat plate in place and install the 90 degree adaptor over it, or do I remove the plate and then install the adaptor? Attached photos are better than my description.

 

[rustycowll69]

it's an either/or, not both.

 

[str12-340]

No plate, just the adapter, and the three gaskets that it takes to install it!

 

[Bobacuda]

No plate, just the adapter, and the three gaskets that it takes to install it!

Are you saying I need 3 of the large gaskets at one time to get it to seal?

 

[66fyssh]

You'll need a kit like this. The smaller gaskets go on the bolt. The cork goes under the adapter, the other small one under the bolt head. They are getting harder and harder to find.

 

[pittsburghracer]

You'll need a kit like this. The smaller gaskets go on the bolt. The cork goes under the adapter, the other small one under the bolt head. They are getting harder and harder to find.

View attachment 1715528216

Superformance Gaskets. And he's a MOPAR racer too. Great products.


Superformance Products - Performance Automotive Gaskets and Seals

 

[Matts440]

Superformance takes good care of us Mopar guys, hes help me out and even picked up the phone on a saturday.