A body .990 torsion bars

-
Status
Not open for further replies.
GaryKephart

GaryKephart

Well-Known Member
Joined
Feb 24, 2007
Messages
60
Reaction score
0
Location
Des Moines, IA
Rating - 0%
0   0   0
Contact seller
Mancini and Summit don't sell .990 torsion bars anymore? I just looked on both sites and couldn't find them. Who has them? I have a 70 Swinger with a 440.

Thanks
 
Will these work?

Dart Sale 075.jpg
 
1 inch bars are going to be very stiff. If the 990 bars cant be found, you might go 1 size under and use stiff shocks, like a good rebuildable type, or 1.00's and run a softer shock. 990 to 1000 may not be as bad as you think.
 
pishta said:
1 inch bars are going to be very stiff. If the 990 bars cant be found, you might go 1 size under and use stiff shocks, like a good rebuildable type, or 1.00's and run a softer shock. 990 to 1000 may not be as bad as you think.
Click to expand...


1" bars are not stiff at all. especially with a 440 . i know guys running small blocks with 1" bars and the ride is firm but no where near harsh or stiff.
 
I run the Just Suspension 1.0" bars in my smallblock 68 Cuda...The ride is not harsh at all...In fact, I love it!!!
 
Status
Not open for further replies.
-

Back
Top