[WANTED] A BODY PARTS

[madmax669]

NEED TRANSMISSION BOLTS AND STARTER BOLTS FOR A727 TRANSMISSION 340 ALSO NEED CROSSMEMBER FOR 70 DODGE DART 727 TRANS

 

[ScampMike]

are you needing the "correct" bolts? if not, grade 5 at a hardware store.

 

[Bddodge]

I have the cross member from a 70 duster.

 

[physixx]

I have the crossmember from a 70 Duster along with the starter bolts but what trans bolts do you need?

 

[madmax669]

I have the cross member from a 70 duster.

how much

 

[madmax669]

how much

I NEED ALL THE BELL HOUSING BOLTS AND STARTER BOLTS SHIPPED TO 76120

 

[physixx]

I have all the bolts that you need plus the crossmember.

PM sent.

Ken

 

[madmax669]

how much for every thing
shipped to 76120

 

[physixx]

I sent you a PM.

Ken

 

[barracudakid]

In box full
Also have it all

 

[davescuda]

Just to help, If you are doing 70 correct. The cross member for 1970 have the small holes

 

[fixitfirstime]

NEED TRANSMISSION BOLTS AND STARTER BOLTS FOR A727 TRANSMISSION 340 ALSO NEED CROSSMEMBER FOR 70 DODGE DART 727 TRANS

Isn't auto trans crossmember a common part across model lines? Do you have access to

 

[fixitfirstime]

Isn't auto trans crossmember a common part across model lines? Do you have access to

Other models around 1970 to check and see? in a salvage

 

[madmax669]

I really don't know the size bolts that it has its a70 dart swinger the car come originally with a slant 6 so I'm assuming that I'm gonna need another cross member if the one I have will work great right now my car sitting on the trailer

 

[madmax669]

AND can't get to anything to see

 

[physixx]

Your cross member should work. So will the starter bolts I believe. The trans bolts I'm not sure of though.

 

[madmax669]

What size they are sorry for all the replys keep hitting post reply

 

[gregpurcell]

The crossmember from your slant six is the same as a v8 any automatic or four speed. Except for the bolt size difference mentioned above you can use ANY A body crossmember from 67-72. Since you are not doing "numbers match" don't worry about the size of the bolts.