A demo of my in cabin manual idle control.

[TrailBeast]

The original discussion on this is here: To separate the idle cam from the choke

Some pics of the finished controller I had to build are here: Part for manual control of the idle speed from inside.

This is exactly how I wanted it to work when the weather isn't cold enough to set the high idle.

 

[Dana67Dart]

Nice, and if you put enough adjustment into it it could act like a poor man's Cruse control.

 

[straightlinespeed]

Nice job!

 

[MileHighDart]

Nice job, and the car sounds good too!

 

[TrailBeast]

Nice, and if you put enough adjustment into it it could act like a poor man's Cruse control.

Too fine of an adjustment to have enough travel for that.
Probably a bit unsafe as well.

 

[kursplat]

nice, came out great.
our work trucks have a similar setup. nice thing about them is the quick release. if you wack the red button you don't need to use the aduster wheel to lower the idle

 

[Princess Valiant]

Not a bad morning activity for 9:49 A.M.

 

[TrailBeast]

Not a bad morning activity for 9:49 A.M.

Casually getting setup for my Youtube channel Mopars4us.

 

[Dana67Dart]

Probably a bit unsafe as well

Safe... We don't know nothing about being safe!


I used a cane for cruse control in a moving van once, pushed down on the pedal and tucked the other end under my hip. Worked great.

 

[Dartfreak75]

Nice trick! I like that. I subscribed to your YouTube channel!

 

[skidmark]

@TrailBeast
Idle sounds real nice
If I remember right that’s a stock 5.9 magnum cam reground by Oregon?
Is there a regrind part number?
Awesome job on idle controller!
Subscribed to your YouTube channel looking forward to it.