Accel Dual point Distributor parts needed !!!

[NCmtnDWELLER]

Any specific companies cater to points type ignitions anymore ???
I need racing points and hardware in general for my dual point Accel unit for small block thanks.

 

[Murray]

Call Accel?

 

[sccachallenger]

Call Accel?

Quite a few years ago I priced replacement parts for my 340 distributor, they were available but $$$$$$!
If you need cap, rotor, points, and condenser, it wasn't much more to buy a complete distributor.
The good news is that I think all their point distributors use the same parts, so you might look for a brand X model and score all the parts you need. My suspicion is these parts are interchangeable with pre-HEI gm stuff.
Points may even fit shoebox chivvies. Please let us know how you make out.

 

[Murray]

Just for the sake of argument, have just dyno'ed my 383 resto motor. Has standard repo points, cond, coil. Ran it up to 6K several times w/o a hiccup. Do you really need that Accel?

 

[NCmtnDWELLER]

Quite a few years ago I priced replacement parts for my 340 distributor, they were available but $$$$$$!
If you need cap, rotor, points, and condenser, it wasn't much more to buy a complete distributor.
The good news is that I think all their point distributors use the same parts, so you might look for a brand X model and score all the parts you need. My suspicion is these parts are interchangeable with pre-HEI gm stuff.
Points may even fit shoebox chivvies. Please let us know how you make out.

Thank you that makes sense to have parts coverer many applications I was wondering if Chebby parts from the same era would interchange etc thank you Sir
I guess racing points ### from a Chebby could be used in a Ford or Mopar distributor.

 

[NCmtnDWELLER]

Just for the sake of argument, have just dyno'ed my 383 resto motor. Has standard repo points, cond, coil. Ran it up to 6K several times w/o a hiccup. Do you really need that Accel?

I have many oem custom built
Non vacumm electronic distributors and many chrome racing coils in my collection but to better represent my
Build ( Vintage Super Stock ) I wanted the older stuff from 1967 & older .
U are correct if I was running a Crane fireball cam and some small JC Penny headers reg points would work but im trying to make alot more power than a boulevard cruiser thanks Chris.

 

[NCmtnDWELLER]

Quite a few years ago I priced replacement parts for my 340 distributor, they were available but $$$$$$!
If you need cap, rotor, points, and condenser, it wasn't much more to buy a complete distributor.
The good news is that I think all their point distributors use the same parts, so you might look for a brand X model and score all the parts you need. My suspicion is these parts are interchangeable with pre-HEI gm stuff.
Points may even fit shoebox chivvies. Please let us know how you make out.

Thank you sir ### im on it im trying to locate some older Accel catalogs and see if part numbers are the same for multiple applications.

 

[sccachallenger]

Ok, did some digging, try speedway and jets, probably need the numbers off your distributor.
Jegs shows cap and rotor kits, hopefully one will fit yours. I might buy one too!

 

[NCmtnDWELLER]

Ok, did some digging, try speedway and jets, probably need the numbers off your distributor.
Jegs shows cap and rotor kits, hopefully one will fit yours. I might buy one too!

Thank you just bought 3 sets of 42 oz racing points off of Flea bay im on a Horting mission now to fill some crate's up with parts for the future .

 

[NCmtnDWELLER]

Ok, did some digging, try speedway and jets, probably need the numbers off your distributor.
Jegs shows cap and rotor kits, hopefully one will fit yours. I might buy one too!

Is Jets a company ???
Never heard of them

 

[NCmtnDWELLER]

Ok, did some digging, try speedway and jets, probably need the numbers off your distributor.
Jegs shows cap and rotor kits, hopefully one will fit yours. I might buy one too!

I have a Mallory unit I will give u if u want it ####
Im already into the Accel units so I need to give this one to somebody its worth a little work to bring it back to life !!

 

[sccachallenger]

Is Jets a company ???
Never heard of them

whoops, Jegs was changed to jets, thought I'd fixed it.

 

[sccachallenger]

I have a Mallory unit I will give u if u want it ####
Im already into the Accel units so I need to give this one to somebody its worth a little work to bring it back to life !!

Thanks for your offer, the builder of my Challenger used an Accel to trigger an MSD 7 box. Car was built in the early '80s and I'm trying to keep it "as built" as much as I can. Am curious what part number Mallory this is.

 

[NCmtnDWELLER]

Thanks for your offer, the builder of my Challenger used an Accel to trigger an MSD 7 box. Car was built in the early '80s and I'm trying to keep it "as built" as much as I can. Am curious what part number Mallory this is.

 

[NCmtnDWELLER]

Bought 2 this week
New one in the box was $200 the other one complete and it was $75 shipped.

 

[sccachallenger]

You are a fan! So I should check with you for parts sources.

 

[NCmtnDWELLER]

You are a fan! So I should check with you for parts sources.

Good idea ###
They dont make what im looking for anymore.