Aftermarket 8 3/4 Small Bolt Pattern Axle Shafts?

[scatpackbee]

Does anyone know if the aftermarket makes a factory drop in 8 3/4 axle shaft with small bolt pattern for 7/16 pressed studs? I don’t want to change rear brakes too.

Car is a ‘68 Barracuda.

Thanks

 

[kmabry]

Dr Diff

 

[scatpackbee]

Thank you.

Would you know a part number?

I checked his site last night and it looked like all shafts I saw were for 1/2 studs.

 

[Daves69]

FWIW, Moser has direct fit for re-drills.........

A30-CST-A45 - A-Body, 8 3/4" Rear Axle Shafts, Stock A-Body Drum Brake (Redrilled) -- 30 (Pair) - Moser Engineering

A30-CST-A45 - A-Body, 8 3/4" Rear Axle Shafts, Stock A-Body Drum Brake (Redrilled) -- 30 (Pair) Part #: A30-CST-A45 (1-Pair)Mfg: MOPAR - Dodge, PlymouthModel/Year: (A-Body) Barracuda (1964, 1965, 1966, 1967, 1968, 1969)Dart (1964, 1965, 1966, 1967, 1968, 1969, 1970 ,1971, 1972, 1973, 1974, 1975...

www.moserengineering.com

 

[Professor Fate]

Moser also has the stock-spec axles, call to confirm that they use the stock 7/16" press-in studs- it doesn't mention stud size in their listing. They're pretty flexible, though- they can set you up with what you need.
A30-CST-A4- A-Body, 8 3/4" Rear, Stock A-Body Drum Brake -- 30 Spline (Pair) - Moser Engineering

 

[kmabry]

Let me see if I still have the box.
I just installed a set on my 68 barracuda with the 7/16 lugs and the small bolt pattern.
You just need to email Cass and he will hook you up.

 

[scatpackbee]

Got an email back from Cass at Dr. Diff.

He’s got exactly what I need although they’re not listed on his website.

Thank to everyone who replied.