Alloy Heads

[Stewie1977]

Ok so here are the specs for the other heads I mentioned as promised.

VALVE LIFT 100 200 300 400 500 600
INTAKE 69 129 188 232 249 251
EXHAUST 64 108 142 171 183 190

Small Block Chrysler cylinder head


Cylinder Head Style: Bare
Cylinder Head Material: Aluminum A356.2 T6
Cylinder Head Finish: Natural
Combustion Chamber Volume (cc): 58
Intake Runner Volume (cc): 176cc
Exhaust Runner Volume (cc): 75cc
Intake Port Location: Standard
Exhaust Port Location: Standard
Intake Valves Included: No
Intake Valve Diameter (in): 2.020 in.
Exhaust Valves Included: No
Exhaust Valve Diameter (in): 1.600 in.
Valve Springs Included: No
Damper Spring Included: No
Retainers Included: No
Locks Included: No
Valve Stem Seals Included: No
Rocker Arm Studs Included: No
Rocker Arms Included: No
Rocker Arm Nuts Included: No
Guideplates Included: No
Valve Cover Mounting Style: Perimeter bolt
Accessory Bolt Holes Drilled: Yes
Intake Valve Angle: 18
Valve Guides Included: Yes
Valve Guide Material: Manganese bronze
Valve Seats Machined: No
Valve Seat Material: Meatal powder
Steam Holes Drilled: No
Oiling Style: Through head
Machined for O-Ring: No
Heat Crossover: No


Not exactly the same as the Aeroflow as these have a smaller chamber.

 

[Bakerlite]

Ok so here are the specs for the other heads I mentioned as promised.

VALVE LIFT 100 200 300 400 500 600
INTAKE 69 129 188 232 249 251
EXHAUST 64 108 142 171 183 190

Small Block Chrysler cylinder head

Not exactly the same as the Aeroflow as these have a smaller chamber.

LOL, those are the exact same lift and flow numbers of the Edelbrock Performer RPM SB Mopar head....
http://www.edelbrock.com/automotive/mc/cylinder-heads/chrysler/performer-rpm-sb.shtml

Your getting played...

 

[m880]

Made in China:wack::wack::wack: spend the extra money buy the real thing Edelbrocks..my 416 had 11.9 to 1 comp. ran on 93 no problem Edelbrock heads of coarse..

Agree as China is nobodies friend and any money is taken away from freedom and sent to commies,:wack:

 

[m880]

Agree as China is nobodies friend and any money is taken away from freedom and sent to commies,:wack:

Also,the eddies aren't that much more and it pays people here a decent wage,no some commies .50 ct per hour and the rest to the commie republic to build aircraft carriers to kick our a$$ with,rayer:

 

[Bakerlite]

Also,the eddies aren't that much more and it pays people here a decent wage,no some commies .50 ct per hour and the rest to the commie republic to build aircraft carriers to kick our a$$ with,rayer:

LOL.. you could be at war with China and you would still see people tying to buy those cheap knock offs... Being committed to your country and the people who live in it takes a little more effort than just flying a flag in your front yard...

 

[IRISH RT]

The seller of Procomp will make a great Sales Pitch for their Product as Edelbrock dont need too proven without doubt would rather pay $1000 extra for the satisfaction of not worrying on the what ifs of the unknown alloys

 

[Bakerlite]

If your going to purchase and encourage stolen head designs then you might as well just go to the track and steal some heads off someones car..because in reality, that's what your doing to Edelbrock.