aluminum rims for a rampage or 80s shelby fwd

-
Status
Not open for further replies.
Well, I'm too far away, but since you said Rampage I am assuming that you still have the four lug setup. There are a lot more choices if you swap over to five lug (I've never done it on one, but the parts should swap over from a later L-body at least). Then you have a choice of several 15" and a few 16" factory rims.
 
I think it is 5x100mm. We have four cars with that bolt pattern, but I've never bought aftermarket wheels for them so I'm not 100$ sure. FWD Mopars went to five lug starting in 1985 (after the Rampage). And, yes I used to own an 82 Rampage. Great little truck.
 
with the 5 lug Small bolt mopar wheels fit also. I have 4 donut tires on my duster to roll around that off of shadows and a daytona. The centers will be bigger if you use SBP on the rampage which shouldn't matter.
 
at this point,id would take some better looking 4 lug rims.I saw the rampage today,and the factory wheels are ugly as ive ever seen!I would like to find out what the bolt pattern is on it now,4x100mm?What other cars have that pattern?
 
Yes your Rampage will be 4 X 100, which is the same as 4 bolt Neon, I think 94 - 96, I think the ford escort early to mid 90's came with 15's on that bolt pattern as well as Honda Civic in the 2000's. There is probably more out there but nothing else comes to mind.
 
Thanks.Im gonna be looking for some kind of wheels the next few weeks that i can pick up cheap.There is a local yard with piles of fwd mopars and fords,and they sale stuff dirt cheap.I did see a honda prelude out there with some killer looking wheels,i just need to go measure the bolt pattern for fitment,i guess.
 
I also need the jack and everything out of a rampage also.The carpetd jack cover is still there,but nothing inside.So im guessing there was a tray of some kind?Jack,and handle,and a lugwrench.I would also like an original owners manual,i believe mine is an 83 model,but ill take an 82 to 84 manual.A hanyes or chiltons manual would be cool too.
 
Don't get a Haynes or Chiltons. Go to e-bay and look for the factory shop manuals. 83 FWD should have almost no bidders and be had CHEAP.
 
Hey Tobysoldblue, here are the pics of the 87 Daytona Shelby we talked about. Not sure if it has anything you could use, but here it is. Let me know if you are interested in anything or need more info. And only two wheels are still good. The car does run. Thanks, Robert

mini-DSC01785.JPG


mini-DSC01786.JPG


mini-DSC01787.JPG


mini-DSC01788.JPG


mini-DSC01791.JPG


mini-DSC01794.JPG


mini-DSC01793.JPG
 
if it wasnt so far away,that would make a perfect parts car for me robert.Its got decent wheels,and most of the ground effects i need,and of course the better looking front bumper cover.
 
Hey Toby I remembered when I had my Rampage I put VW Rabbit wheels on it.They looked better than the Rampage wheels.
Jim
 
Status
Not open for further replies.
-

Back
Top