Another Mopar Off My Bucket List - Barracuda Fastback

1967 'cuda · Sep 7, 2014

Now that we've got my son's Charger back in town and he's returned to Iowa with the Challenger, he's starting to get fired up about the Charger build. His latest ideas are centered around intercooling the blower.

Excuse all of the dust that's accumulated. I took the supercharger off of the motor so that I could inspect the blower intake. The Charger's hood has already been modified to fit the blower at it's present height. Adding an intercooler beneath it will mean starting over on the hood. I DON'T want to have to do that. So I was hoping on seeing a way to modify the current intake to accept cooling passages. It doesn't look promising.

View attachment Capture.jpg

View attachment IMG_2652.jpg

View attachment IMG_2653.jpg

View attachment IMG_2654.jpg

View attachment IMG_2655.jpg

View attachment IMG_2656.jpg

View attachment IMG_2657.jpg

View attachment IMG_2658.jpg

View attachment IMG_2659.jpg

View attachment IMG_2660.jpg

1967 'cuda · Sep 9, 2014

Another day of thunderstorms. It's been raining pretty hard. - Lots of thunder and lightning. Hopefully we won't see the high winds and hail that they've said could be coming our way. There's water a couple of inches deep running down our streets now. Maybe it'll drown some of the bugs that haven't set up housing inside our garage. I've heard that the Farmer's Almanac is predicting heavier than normal snowfall this Winter. I better make sure that I've gotten all of the projects as far along as I can before then and that the Charger is inside the garage to keep me busy until Spring.

I was preparing to do the trunk mural on the Duster when I realized that I still haven't been able to find my old airbrush. I went on eBay and shopped for a replacement.

The last large car show of the year around here is in West Point, Nebraska. I noticed on their flyer that Richard Rawlings is supposed to be there. I'm assuming that he'll have some Gas Monkey car displayed. I'd like to go just so I could look over whatever it is that they might bring. I've always suspected that their workmanship would be sub-par, but you never know. Maybe I'd be impressed. I wouldn't think that they would show any vehicles that had noticeable flaws. As much as we tend to joke about their program, it would be a kick to have a picture of him next to one of my cars to hang on the garage wall. The show is on the 21st.

I've got a major conflict. I had been planning on going to Cedar Falls, Iowa to the Mopar Max event. I noticed that it's on the same weekend as the Fall swap meet in Fremont, Nebraska. I suspect that some of the items stolen from our farm might show up at that swap meet. I need to go to it to look. It's always one of the largest swap meets in Nebraska.

sleepyhead416 · Sep 9, 2014

THANK YOU, for Weather Report

1967 'cuda · Sep 9, 2014

sleepyhead416 said:

THANK YOU, for Weather Report

Click to expand...

With all of the vehicles outside it's hard to find much else new to report.

I did play around with the computer in the Roadrunner yesterday for awhile. The whole concept of having it control timing is still foreign to me. We initially had it (the computer) set at 16" advance at idle and 34' total. I tried to change it to 20' initial and 36' total. It barely ran after doing so. But I found that if I started over from scratch reprogramming the controller and used those same parameters (20' & 36') it actually ran better. Why it didn't behave the same when editing the program as opposed to starting the reprogram from scratch, I don't know. I was under the impression from the instructions that those parameters should be able to be adjusted 'on the fly'.

To those out there that are wondering why I am not going to FAST for information, - I do plan on it. But past experience with their tech support tells me that I'm likely to hear that they don't know what the issue is and that I need to verify (wire by wire again) that everything is assembled correctly. I figure that if I can get as familiar as possible with every quirk this system has and explore all options that I can think of, that I'll either be able to figure it out for myself or at least be able to give them enough info so that they can.

1967 'cuda · Sep 12, 2014

Life (and weather) continue to get in the way of progress on these projects. It's been struggling to get into the 50s this past week. With all the rain I haven't even taken the time to try any more tuning on the Roadrunner.

While I'm seeking shelter inside the house I've been looking into starting up a chrome plating business. I'd sent the 'Lil Red's air cleaner off to Sioux Plating a few weeks back and they estimated a cost of $100 to re-do it. I would love to have a lot more of my own stuff plated but can't justify the expense. If I had the ability to do plating myself I'd have things like shiny driveshafts and master cylinders. I might even become a chrome-aholic and plate K-members and suspension components. There's no doubt a point where it could get tacky, but a little more shine here and there would be nice.

The dilemma I have is still the expense. I've got the opportunity to purchase the equipment but it's not cheap. The only way it makes sense to me is if I decide to get into it seriously and set up a business so that it can make me money rather than cost me.

I called around to a few guys that I know that need plating work done. One friend recently purchased a 1930 Dodge sedan and the other has a mountain of used O.E.M. Mopar parts (such as arm rest bases and dash bezels) that could use re-plating. They'd both be willing to give me a shot if I had the equipment but it wouldn't be enough work to offset my costs. One other idea that occurred to me was to get hooked up with a few of the restoration shops so that I might have a steady flow of work. I can't expect any of them to commit until they're able to see examples of finished work, so the best I can hope for is a not-so-firm maybe.

I'd ordered a few airbrushes online to help with the Duster trunk. One of them showed up today. Years ago when I was doing sign painting I found that it was helpful to have more than one. I used to run a Binks single action and a Paasche dual action. I'll never claim that I was an expert with them but I became comfortable using them for some work that couldn't have been handled with a brush, larger gun, or rattle can. After 20 years I'm not expecting to impress myself on this mural.

1967 'cuda · Sep 14, 2014

Zero progress on the projects still. I've been too busy with working on other things.

For the past few months I've been trying to help a buddy of mine from Seward, Nebraska find a '69 Coronet. When he was young he had a '68 that he'd sold and he was hoping on tracking it back down and buying it back. We followed several leads but they all led to dead ends. During the course of the search we found and looked at a number of others. Some were 68s and some were 69s. There were Coronet 440s, 500s, R/Ts, and Superbees. As the prospect of finding his original car became less and less likely he decided to give up on the search and look for a replacement instead. He realized (after looking at several other cars) that he actually would prefer a '69. So that's what we focused on.

Several years ago he had done a nuts and bolts build on a '55 Chevy and wasn't shy about undertaking a project car but wasn't opposed to purchasing one that was already finished. Because he was willing to travel we did a search all across the country. The biggest obstacle with the cars that were a long distance away was that it is impractical (expensive) to view the cars in person prior to buying them. - And then there is the added expense of transporting them back home.

A '69 R/T had appeared on eBay that he missed out on. It had a 'Buy It Now' price of $7000 on it and was totally disassembled. It was nicely optioned but we were unsure of the condition of the parts that weren't shown. The sheet metal work was completed. Before he put in a bid somebody else snatched it up.

Another friend was helping in the search. Yesterday we went to look at a '69 Coronet 440 that he'd picked up in partial trade for a Dart convertible he sold. After some wheeling and dealing they came to terms and is now officially back as a member of the Ma Mopar club. The coronet 440s don't have the status of an R/T or a Superbee, or even a 500. They don't command the highest prices when completed either. So it won't be going back to original. He'll pick the options that he wants to have exactly the car that he'd ideally want. Most likely it'll get painted B5 Blue with a white tail stripe, twin hood scoops, get a black interior, and a built 440.

View attachment image[1].jpg

1967 'cuda · Sep 14, 2014

- Time for another 'no progress' progress report. This is one of the longest progress droughts that my cars have had to endure. I still wade out through the mess in the garage to get to my computer. Apparently I'm still loved. The mosquitoes survived being drowned or frozen and greeted me when I came in and sat down.

I guess I'm going into the plating business. Today I bought the equipment and I'm getting ready to order the chemicals. - Bright shiny chrome and gold as far as the eye can see. Maybe I should get one of those big gaudy chain necklaces to wear and gold plate my front teeth. Suddenly I have the desire to build a low rider. - Tru-spokes and whitewalls. Maybe a '64 Impala with hydraulics..... OK, enough of the nightmare I had last night. - But I did actually buy the plating equipment.

Abodybomber · Sep 14, 2014

Plating sounds, like a new adventure. As for Impala's, '62 Black/red gut for me.

sireland67 · Sep 14, 2014

Did you happen to check in the EPA regulations for the chemicals?
Just curious on what permits are needed etc.

Cuda68Scott · Sep 14, 2014

I gotta say that you keep this thread interesting - juggling restorations on about 5 cars at once, racing, car finding, and now a plating business! I always look forward to your posts.

1967 'cuda · Sep 14, 2014

sireland67 said:

Did you happen to check in the EPA regulations for the chemicals?

Click to expand...

sireland67 said:
Just curious on what permits are needed etc.

I talked to the guy that I'm buying it from tonight and he's planning on going over all the details with me when I pick it up. The system is self contained so that there won't be anything running into the sewer system. It's designed to catch all of the runoff for later disposal. I'll have to find out the proper way to dispose any residue. If I start out only plating my own stuff it's unlikely I'll be scrutinized at first but I want to make sure I've got all my ducks in a row by the time I get everything up and running.

I hadn't revealed all of the details of this plating setup. This isn't one of the conventional electroplating systems that most people are familiar with. Originally I had been considering going that route but changed course when I'd seen a video on Jay Leno's Garage hyping a 'spray-on chrome plating.

It sounded like a joke to me at first because I've wasted money before on aerosol chrome that was nothing more than shiny silver paint. But the video showed true chrome results. Since then I found that a lot of (if not all) European platers were changing over to similar systems because of environmental regulations. I researched several different companies that were selling systems and found that many had trouble with adhesion or yellowing, or finish. Naturally they all toted why each of their systems was the best. But after further research I found that most were pretty crappy. I'd remained skeptical until I looked into Spectra-Chrome. That's what the system is that I've bought. It uses a true layer of real silver sandwiched between 2 other chemical layers. This short video shows a wheel being done with it. There are some really amazing videos of it out there especially on their own website.

It's capable of plating over plastics and it's impossible to peel it off. The adhesion is so good and it's so flexible that you could actually coat leather with it. Done properly, the finish is flawless if the prep work was right. The value of the equipment I bought is around $20,000. I saved a bunch by buying this system used. The chemicals I still need will run me about $2000 more yet. It's not some cheap fly by night system and I really debated whether or not to invest in this. I managed to talk to a few guys with this setup and they claim that it's every bit as good as advertized. If everything works the way I hope it'll still take a long time to recoup what I've spent.

1967 'cuda · Sep 14, 2014

Cuda68Scott said:

I gotta say that you keep this thread interesting - juggling restorations on about 5 cars at once, racing, car finding, and now a plating business! I always look forward to your posts.

Click to expand...

It's the ADHD! - You're buying into the insanity.

- Thanks Cuda68Scott.

1967 'cuda · Sep 15, 2014

I searched for threads about Spectra-chrome here on FABO and found a number of them where others were interested in finding out more info. There were a few comments I found that were negative. I'm hoping that the naysayers are wrong. - I'd hate to find out that my piggy bank died a horrible death for an unworthy cause. Time will tell.

One of the complaints I read was that it won't stand up to abuse. That was one of my biggest concerns when I was doing my research. I'd read complaints about several of the other 'spray chrome' systems peeling off. I watched a bunch of youtube videos showing those problems. It made me want to give up on getting into anything other than true electroplating.

I called up Spectra Chrome and talked with them. I may be a dummy but even I realize that it's not wise to take the word of a salesman. They assured me that if I used their system correctly I wouldn't have those problems. I wasn't convinced until I talked to 2 people that use Spectra Chrome's system. They each cautioned me about potential issues. They were firm believers in the system but each told me that the learning curve was pretty steep. Both guys had bought their setups with the intention of only using it on personal projects. - And both told me that their first attempts at using it didn't turn out well. But they both said that eventually they were turning out flawless work that you couldn't distinguish from traditional plating. - And both evolved their systems into viable businesses.

I'd researched more and found Sprint cars owned by the likes of Tony Stewart, monster trucks like the Gravedigger, and several Formula 1 cars were using Spectra Chrome. These aren't the type of people that are trying to cut corners with cheapo finishes.

I know that I've heard the proof is in the pudding. I don't know where the hell that saying came from but I understand that until I can actually produce a finished piece that holds up, even I will remain a skeptic.

1967 'cuda · Sep 16, 2014

I picked up the Spectra-Chrome system this afternoon. There are not enough chemicals with it to do any plating so I had some ordered by the gentleman that I bought the system from. I want to do some experimenting with it before I order a full chemical kit (around $1600) from Spectra-Chrome. They will not sell the individual chemicals to anyone that has not purchased one of their systems or at least a full chemical kit. I know that I will eventually need to order the full kit from them but do not want to until I'm practiced up. There is a one year shelf life to them.

The guy in the pictures is who I bought it from. I was a bit disappointed when I walked into his garage. I'd expected to be blinded by chrome everywhere. He did show me some examples of things he had done though.

The small roll around chair is part of an electroplating system that was included. I will be able to plate nickel, copper, and gold. While I was there we copper plated a nickel.

I did ask him about the disposal of chemical residues and he said that he had been collecting it for the past 3 years in a 55 gallon drum that he kept outside. Due to evaporation there was less than 15 gallons in it. He said the EPA would definitely frown on dumping it and that I should find someone licensed to dispose of what I accumulate. The stainless steel pressurized canisters beneath the table contain the mixed chemicals to be sprayed. The large white plastic containers are for the waste.

Not pictured is the water purification system and deionizer. He included them with the sale.

He had explanations for each of the problems that I've heard associated with this Spectra-Chrome. And he emphasized that the system is easy to use but the prep is 95% of the work. All of the sanding, smoothing and refinishing before the spray on chrome is applied is what's necessary for professional results.

View attachment IMG_2664.jpg

View attachment IMG_2665.jpg

View attachment IMG_2666.jpg

View attachment IMG_2667.jpg

View attachment IMG_2668.jpg

1967 'cuda · Sep 18, 2014

I spent some time working on the design for the trunk mural today. I cut 4 sheets of red 'rosin' paper to match the size of the Duster's trunk lid. Then I played around some more with the sizes of the images I wanted on it. Lastly, I decided to add the old RAPID TRANSIT SYSTEM logo.

It's time consuming but I need to turn the pattern I just made into a series of templates for the air brush. I'm hoping that by making 4 copies of this I can then cut out the portions that I'll be spraying. Different ones will have different sections cut out. By reproducing the entire image I'll be able to align all 4 templates. Keep in mind that it's been a lot of years since I've done this sort of work so the finished design may have a lot of flaws.

View attachment IMG_2669.jpg

View attachment IMG_2672.jpg

Abodybomber · Sep 19, 2014

1967 'cuda said:
I spent some time working on the design for the trunk mural today. I cut 4 sheets of red 'rosin' paper to match the size of the Duster's trunk lid. Then I played around some more with the sizes of the images I wanted on it. Lastly, I decided to add the old RAPID TRANSIT SYSTEM logo. View attachment 1714754833 View attachment 1714754834 It's time consuming but I need to turn the pattern I just made into a series of templates for the air brush. I'm hoping that by making 4 copies of this I can then cut out the portions that I'll be spraying. Different ones will have different sections cut out. By reproducing the entire image I'll be able to align all 4 templates. Keep in mind that it's been a lot of years since I've done this sort of work so the finished design may have a lot of flaws.

Interesting work. Done a slight amount of scallops, would like to learn more '60's style paint.Really like Watson's work.

1967 'cuda · Sep 19, 2014

Abodybomber said:

Interesting work. Done a slight amount of scallops, would like to learn more '60's style paint.Really like Watson's work.

Click to expand...

When I was young I believed that everyone that worked with air brush painting murals did them freehand. Now I know that some did but most did a combination of freehand and templates. Obviously scallops and lace require the use of a template or screen. I would guess that the best true artists didn't rely on templates as much (if at all). My two favorite artists were Frazetta and Vallejo. I'm no artist. I try to do the best I can with very limited skills.

The way that I'm doing this work I need to cut out the pattern that I made without damaging the surrounding paper. Then I will apply a very light tacky adhesive to the back of the paper and position it where I want to paint it. In these pictures you can see that I layed some sheet Styrofoam behind the design and began cutting out the lettering with a razor knife.

After I'm finished with my templates I will use the air brushes to paint in the colors and fog the edges for shading effects. Some of the details will have to be hand brushed on. I'm keeping my fingers crossed. It's been a long long time since I've done this.

I've got 3 air brushes here now. - A very cheap single action Badger siphon feed, a MAC dual action gravity feed, and a Paasche dual action siphon feed. Most likely I'll be using 1 Shot lettering enamel.

Most of the work I used to do was by pencil sketching directly on the surfaces I was painting and then free-handing over the drawings. I had some decent results and a handful of the vehicles I did won paint awards. But they all seemed amatueristic to me when compared with the pros.

View attachment Frazetta1.jpg

View attachment vallejo.jpg

View attachment IMG_2674.jpg

View attachment IMG_2675.jpg

View attachment IMG_2676.jpg

Abodybomber · Sep 19, 2014

1967 'cuda said:
When I was young I believed that everyone that worked with air brush painting murals did them freehand. Now I know that some did but most did a combination of freehand and templates. Obviously scallops and lace require the use of a template or screen. I would guess that the best true artists didn't rely on templates as much (if at all). My two favorite artists were Frazetta and Vallejo. I'm no artist. I try to do the best I can with very limited skills.

View attachment 1714754891

View attachment 1714754892

The way that I'm doing this work I need to cut out the pattern that I made without damaging the surrounding paper. Then I will apply a very light tacky adhesive to the back of the paper and position it where I want to paint it. In these pictures you can see that I layed some sheet Styrofoam behind the design and began cutting out the lettering with a razor knife.

View attachment 1714754893

View attachment 1714754894

After I'm finished with my templates I will use the air brushes to paint in the colors and fog the edges for shading effects. Some of the details will have to be hand brushed on. I'm keeping my fingers crossed. It's been a long long time since I've done this.

Most of the work I used to do was by pencil sketching directly on the surfaces I was painting and then free-handing over the drawings. I had some decent results and a handful of the vehicles I did won paint awards. But they all seemed amatueristic to me when compared with the pros.

Thank you! Been a fan of Vallejo's art,since I was a kid. I appreciate you sharing this information. I do agree,this is bold nowadays. Beats looking at flat black, no horsepower, rat rods.

1967 'cuda · Sep 20, 2014

It was errand day today. I finally got all of the plating equipment unloaded from my truck and trailer. It will probably be a few weeks before I get everything set up and am ready to make my first attempt on a part.

I helped my buddy haul the '69 Coronet back to his home in Seward, Nebraska. We spent quite a while gathering up parts to go with it from various locations. Rather than a simple as is purchase, he was able to get a bunch of other parts included with the purchase. A good large pinion 3.23 posi section, an uncracked original steering wheel, a pair of factory sport mirrors, factory twin hood scoops, a center console, bucket seats, a new replacement right rear quarter panel, and other odds and ends.

View attachment IMG_2677.jpg

View attachment IMG_2678.jpg

View attachment IMG_2680.jpg

View attachment IMG_2681.jpg

View attachment IMG_2682.jpg

View attachment IMG_2683.jpg

View attachment IMG_2684.jpg

View attachment IMG_2685.jpg

View attachment IMG_2688.jpg

View attachment IMG_2689.jpg

1967 'cuda · Sep 20, 2014

Tomorrow is the big car show in West Point, Nebraska. I've been too busy to get any of my cars ready for it. According to the advertizing on the posters, Richard Rawlings of Fast & Loud is supposed to be there.

I'm hoping that they'll have one of the Gas Monkey Garage vehicles on display. I'd like to get a close up look at how well one of theirs is put together and detailed. Everybody makes jokes about them and I find it hard to believe that those guys we see on the show are really turning out quality work worthy of the prices they claim to sell them for.

I wish I was taking one of my cars, - probably the 'Cuda. Despite all the jokes, I'd love to have a picture of him standing next to my car to hang on the garage wall. LOL.

View attachment rawlings1000.jpg

1967 'cuda · Sep 21, 2014

I decided to pull the trigger and bought a TCI stall converter from SBeeMan. The stall speed is rated at 3500-3800. I should start to see some more daylight under the front tires soon. According to the torque curve the 408 produces it should be about right. I hem-hawed back and forth about making the deal because I'd wanted to do more research on converters before deciding. With a big swap meet coming up in Fremont, Nebraska next weekend there was a chance I'd find a better deal. But when he agreed to drop the price I cringed and sent payment.

1967 'cuda · Sep 21, 2014

I survived another car show without taking home a trophy. - Of course, I cheated this time by not entering any of my cars. I never caught even a glimpse of Richard Rawlings. I don't know whether or not he showed up but I did see the 'secretary' from the show there. As far as any of the Gas Monkey cars... - well if any of them were there I was unaware of it. They did have that semi truck that they used in their Smokey and the Bandit episodes though.

I didn't count the bikes but there must have been close to a couple hundred of them that showed up. There was around 700 cars and trucks. Even though the Mopars were heavily outnumbered they made a good turnout.