Anybody use Wilwoods w/a power booster ??

[MoparVT]

I am looking into doing a wilwood swap on my 72 swinger. I found a kit (on e-bay)that uses the stock 9" spindles. I asked the seller if they worked w/a power brake booster and they said it did. I just want to be sure.
Thanks

My goal is to put power discs w/4piston calipers w/drilled/slotted rotors on all 4 wheels. I just want to know if this set-up is going to work..... (wilwoods designed to work w/booster)

Any other opinions,ideas,or advice ,is always welcome....

 

[MoparVT]

Also,what prop. valve do I use?

 

[cuda67]

I am looking into doing a wilwood swap on my 72 swinger. I found a kit (on e-bay)that uses the stock 9" spindles. I asked the seller if they worked w/a power brake booster and they said it did. I just want to be sure.
Thanks

My goal is to put power discs w/4piston calipers w/drilled/slotted rotors on all 4 wheels. I just want to know if this set-up is going to work..... (wilwoods designed to work w/booster)

Any other opinions,ideas,or advice ,is always welcome....

I did a swap to four wheel disc on my 1967 Barracuda. I switched to the large bolt pattern and I used Aerospace Engineering kit. I have power brakes but I had to change the master cylinder because I also used four piston calipers all around and they need a larger diameter master cylinder. I don't know much about the wilwood but I understand they will work.
cuda67

 

[GMachineDartGT]

We have a set that uses all PBR factory calipers, and includes disc brake spindles in the kit. 13" front, 11.75 rear drilled/slotted rotors.

 

[MoparVT]

We have a set that uses all PBR factory calipers, and includes disc brake spindles in the kit. 13" front, 11.75 rear drilled/slotted rotors.

Yes,I've looked. The wilwood kit uses 4 piston calipers ,drilled/slotted rotors,braided SSlines,etc.etc. for 1/2 the price. (uses MY spindle).

Dont get me wrong,the XV stuff looks top notch....but bang for the buck is where I am at....





SO....does anyone know what prop. valve or metering block I need to use???

Thanks

 

[jefflock]

Are you doing the total conversion all at once or are you going to use your drums on the rear?

 

[MoparVT]

Are you doing the total conversion all at once or are you going to use your drums on the rear?

When I do it,I will be doing all 4 at the same time.