Anyone know of a company making upholstery for a one-piece front bench seat for an A-body?

-

Raskull

Active Member
Joined
Jan 23, 2019
Messages
25
Reaction score
21
Location
Pine Island, FL
CORRECTION: I have a solid back bench seat that bolts into my '68 Dodge Dart 2-door sedan. Don't know if the seat is original to the car but it fits. Looking for front & rear seat upholstery. Any ideas are appreciated. It could be a 4-door sedan seat as well?
 
Last edited:
I think all the Mopars were a split bench. You probably won't find upholstery that fits until you find out what the seat came out of.
 
Custom shop’s (which are kinda pricey in my parts)
Legendary Interiors
PG Classic also makes their own line which are less than legendary but perhaps not as refined or ‘factory correct’ as legendary interiors
 

The back seat will be non-functional since I added tubs & a 4-bar suspension. I cut back the top & bottom of the seat to allow it to remain in its stock position. Once the new upholstery is installed, you won't be able to tell that the car is tubbed by looking at the rear seat. First photo is of the Dart's rear interior now. Second is my '65 Valiant Pro-street back seat that was cut the same way. Third is the Valiant trunk showing the tubs.

backseat.jpg


IMG_1379.JPEG


IMG_7931.JPG
 
-
Back
Top Bottom