Anyone make a GOOD sending unit?

[LivewireBlanco]

A sending unit that reads correctly on a stock gauge and not 1/4 full after 2 blocks would be nice. Or even a way to make the crappy ones work correctly.

 

[RustyRatRod]

Not really. The best you can do is get your original rebuilt.

 

[LivewireBlanco]

Not really. The best you can do is get your original rebuilt.

I wish I still had it. Thankfully I kept the lock ring!

 

[moparmandan]

Some have had good luck with a Meter Match.
MeterMatch Fuel Gauge Interface Module

 

[Professor Fate]

TechnoVersions - MeterMatch for Analog Gauge Correction

 

[Professor Fate]

Beat me on the draw, Dan! Darn one-finger typing!

 

[RustyRatRod]

It really doesn't matter how it reads as long as when it reads empty it's empty.

 

[clifftt]

Short answer...No. I sent mine out to be rebuilt. About $200.

 

[Swinging 72]

Short answer...No. I sent mine out to be rebuilt. About $200.

Who did you send it to?

 

[Davecuda]

A sending unit that reads correctly on a stock gauge and not 1/4 full after 2 blocks would be nice. Or even a way to make the crappy ones work correctly.

A couple of weeks ago I. bought a tank and sending unit from A-1 Auto. So far so good. Only used a quarter of a tank, waiting to get down half a tank to fill it up and see how much it takes.

 

[CRUZE 418]

Instrument Specialties

 

[Demonracer]

I you can find an intact original sender, even if it doesn't work send it to Wolf & Company. They refurb them, I recently sent them one & am waiting to get it back. I'll post the results after a tank or two of fuel.