Anyone running old school adjustable Rocker Arms on Eddy 60779 heads?

[Divenut]

Hey Folks,

Getting my list of parts required to install the Eddy 60779 heads on the 340. Not really looking for rollers. I know Edelbrock indicates the heads were designed to accept the old style adjustable rocker arms when using a more aggressive than stock cam. I'm thinking about using the ones in the pic. Anything I should be aware of, any obstacles you may have encountered going this route? Any concern with old/used rockers? Not adverse to buying new, but will use the money elsewhere if possible.

Thanks in advance and I hope all you FABO friends have a fabulous holiday season!

 

[Hellrats]

Nothing wrong with those rocker arms. They are tough as nails.

 

[Mopar Sam]

I have son who has been running them on Edelbrock heads for years. Year round.

 

[D-mailman]

Nothing wrong with those rockers, they are durable enough but the only thing I would add is their ratio is in the 1.45 range and it will cost you some lift. I run the Crane forged 1.6 iron rockers , a true 1.6 ratio and just as durable and affordable if you can find them now . Just FYI .

 

[SS Lancer]

May have to obtain a B3 shim kit if performance valve springs are used !!