Brainstormin' 440 vs 5.9 ...

[318willrun]

I keep looking at the 4.30 gears, 29 inch slicks, and 450ish ft/lbs of torque at 3200 with the 2500’ish stall converter. And then looking at the way the truck was launching while breaking into the 12’s. While it’s probably not going to be as fast as the 5.9 magnum, we might get to see a little daylight showing under the left front tire.

It's a long bed remember... LOL I think the "net" torque from the factory was 325. Don't know what that would be in gross. And, the 440 may push the stall up a little more - that's all torque relevant

 

[318willrun]

Again......

TT5.9mag --------- 16.90
jrc4y4 ------------- 15.30
dirty white boy—— 15.15
71GSSDemon ----- 15.00
Sharpone ---------- 14.85
Killer6——————- 14.81
69conv—————— 14.80
496 polara --------- 14.78
Turbo440Dart ----- 14.70
70SwingerGuy——- 14.65
Mopar44134———- 14.605
mopowers————- 14.53
Curious Duster ---- 14.50
red67gts ----------- 14.40
MOPARMAGA———- 14.32
a-bodyguy --------- 14.319
67/6barracuda ---- 14.20
junkyardhero ------ 14.00
440 Mike ————— 13.90
fishmen67 --------- 13.80
sr71mopar————- 13.75
273 ----------------- 13.70
Garrett Ellison——- 13.58
331MP ------------- 13.40
RustyRatRod ------ 13.016

 

[RustyRatRod]

It's a long bed remember... LOL I think the "net" torque from the factory was 325. Don't know what that would be in gross. And, the 440 may push the stall up a little more - that's all torque relevant

I don't remember. Do you run the truck with the tailgate off or down?

 

[318willrun]

I don't remember. Do you run the truck with the tailgate off or down?

up or down, never off. My wife loves the factory "Dodge" decal on the tailgate. So it stays.

 

[RustyRatRod]

up or down, never off. My wife loves the factory "Dodge" decal on the tailgate. So it stays.

Well, some tracks will tell you either leave it off or close it. They can become a projectile in a crash. Plus if you took it off, that's more weight gone.

 

[318willrun]

Well, some tracks will tell you either leave it off or close it. They can become a projectile in a crash. Plus if you took it off, that's more weight gone.

Our track doesn't care. If there is a crash with my truck, there will be a lot more projectiles than an tailgate LOL

 

[RustyRatRod]

Our track doesn't care. If there is a crash with my truck, there will be a lot more projectiles than an tailgate LOL

Well let's hope you ain't one of um.

 

[318willrun]

Well let's hope you ain't one of um.

Truck actually goes down the track like it's on steel rails....

 

[318willrun]

up or down, never off. My wife loves the factory "Dodge" decal on the tailgate. So it stays.

Here is that beautiful tailgate that my wife loves.... LOL... Gotta keep it look'n nice for those that are back there ...

And a little RAM decal on the side....

 

[fishmens67]

 

[318willrun]

View attachment 1716488068

 

[fishmens67]

View attachment 1716488069

The times some of these guys are throwing around and putting down the 440, I figured they were referring to it performing like a Ewe instead of a Ram. lol

 

[sr71mopar]

Swapping motors in the snow takes a lot of ambition

 

[67/6barracuda]

Add a bug deflector on the hood and a tonneau cover on the bed for that nascar wind tunnel effect. that brick house will drag some air with her. J/k! Be worth a test

 

[318willrun]

Swapping motors in the snow takes a lot of ambition

I swapped K-frames in the snow... but that was 30 years ago.... LOL

 

[fishmens67]

snow

 

[TT5.9mag]

Anyone see Freiburger’s latest video? His new 440 is a turd!

 

[318willrun]

Anyone see Freiburger’s latest video? His new 440 is a turd!

52 minutes? Tell us the results

 

[TT5.9mag]

52 minutes? Tell us the results

Hell no. I ain’t doing your research for you.

 

[318willrun]

I ain’t doing your research for you.

As stated above, my lab is at the track lol

 

[318willrun]

I think the factory has determined what the engine is. The horsepower rating and the torque rating is widely available to the public. We know it’s not a 440 commando. I will not pretend that it is. The amount of videos will not turn it into a hemi and the amount of videos will not turn it into a slant six one barrel LOL

 

[TT5.9mag]

As stated above, my lab is at the track lol

Run down is;
Forged crank, stock rods, forged pistons at zero deck or thereabouts. Stock 452 heads, springs and a Hughes cam 228/232 @050. 110 .530 or so. Makes less than 400. Like I said, turd.