Brake warning light

[NiceFishEh]

I went with one of those SSBC four wheel aftermarket prop valve that doesn't use the dashboard warning light.

Short of pulling the bulb, which is not an easy thing to do, how else can I make that light not come on?

Thanks

 

[RedFish]

if the wire is just dangling, short it to ground or if its grounded disconnect that. Gotta be one or the other.

 

[NiceFishEh]

if the wire is just dangling, short it to ground or if its grounded disconnect that. Gotta be one or the other.

Yeah...it's a dangler! I'll snip it and ground it to the fender somewhere.

Thanks Red

Jim

 

[NiceFishEh]

Yeah...it's a dangler! I'll snip it and ground it to the fender somewhere.

Thanks Red

Jim

HUH!

Snip it ...grounded it ...light still on...nobody home!

What am I missing?

 

[lhearold]

HUH!

Snip it ...grounded it ...light still on...nobody home!

What am I missing?

The light only comes on when it gets grounded under normal conditions. It works on both the prop valve and the emergency brake. Unground the wire you sniped and look for the switch connected to the emergency brake setup under the dash. Either its bad or out of adjustment.

Larry

 

[NiceFishEh]

Thanks Larry