[WANTED] Bucket Seat Mounting Hardware

[carbuff]

I am looking for a small plate that attaches to cables between the mounting brackets of the bucket seats for my 1965 Dodge Dart GT. See attached photos. I can probably make one, but would take one from someone who has it.

 

[barracudakid]

I have something similar to that
How long is it

 

[carbuff]

I have something similar to that
How long is it

3 5/8 “

 

[jeff alder]

Is that the driver's side or passenger side. They are different and one is longer than the other. I may have one.

 

[carbuff]

I do not know; not sure which side I pulled it from. Do you have both? Why would they be different?

 

[jeff alder]

I do not know; not sure which side I pulled it from. Do you have both? Why would they be different?

I may have one or the other...but I'm not sure which one I have. You would have to ask the Mopar engineers why they are different. I refurbished a set from a 65 A Body...(I think it was a Valiant) for a lady that was changing from a bench seat to buckets a couple of years ago. She was a member here just long enough to get the parts because she couldn't find them anywhere else. Anyway, I made her a really nice set...blasted painted new wire and hardware. I still have some of the pieces left because I made her one set out of 4 and may have this. If I do you can have it for freight. I'm getting rid of all my stuff...50 year collection of pieces and parts. The picture and dimensions will probably tell the story, but I just wanted to know which side it was to be sure. Does the release cable slide thru the folded over part of your adapter (in your photo) and an adjustable J bolt go thru the hole on the end? The adapter and J bolts are both different lengths. The one in your photo looks like the longer one.

 

[One Bullet Barney]

Take your conversations to Private message.

 

[carbuff]

I may have one or the other...but I'm not sure which one I have. You would have to ask the Mopar engineers why they are different. I refurbished a set from a 65 A Body...(I think it was a Valiant) for a lady that was changing from a bench seat to buckets a couple of years ago. She was a member here just long enough to get the parts because she couldn't find them anywhere else. Anyway, I made her a really nice set...blasted painted new wire and hardware. I still have some of the pieces left because I made her one set out of 4 and may have this. If I do you can have it for freight. I'm getting rid of all my stuff...50 year collection of pieces and parts. The picture and dimensions will probably tell the story, but I just wanted to know which side it was to be sure. Does the release cable slide thru the folded over part of your adapter (in your photo) and an adjustable J bolt go thru the hole on the end? The adapter and J bolts are both different lengths. The one in your photo looks like the longer one.

Mine is 3 5/8 “ long.

 

[barracudakid]

Mine is 5 1/4