Brian Hood
Well-Known Member
- Joined
- Jan 10, 2009
- Messages
- 128
- Reaction score
- 0
Hello Everyone,
Ive been reading too much! I bought a Comp Cam (Flat Hyd) and some new roller rockers for a 71 LA 318. The specs for the cam are as follows. Intake 462 Exhaust 482 with a lift of Intake 275 and Exhaust 284. The roller rockers I got are 1.6:1. Will these cause problems with too much lift? Should I get a set of 1.5:1s?
Brian
Ive been reading too much! I bought a Comp Cam (Flat Hyd) and some new roller rockers for a 71 LA 318. The specs for the cam are as follows. Intake 462 Exhaust 482 with a lift of Intake 275 and Exhaust 284. The roller rockers I got are 1.6:1. Will these cause problems with too much lift? Should I get a set of 1.5:1s?
Brian