Can anyone ID these upper control arms please?

[Alaskan_TA]

Hi guys,
A pal is cleaning out his shed and does not remember what these came from.

Are they A body?

If so, what year(s) will they work on?

Thanks,
Barry

 

[crackedback]

Barry,

Measure the outside/outside length of the CA bushings. They should be a bout 9.25" on an A.

Top ones look like they might be A's but the bottom pic sure doesn't to me.

Rob

 

[joshhuskey@live]

the top are 73+ a body upper control arms

 

[Alaskan_TA]

OK, thanks guys....

....but they are the same arms top & bottom.

Scratches head........

 

[6pk2goDemon]

Almost impossible to identify what these fit from a picture. Take a couple of measurements please.

So many of these Mopar arms look similar..........

 

[grumpuscreature]

Look like '65-'66 C body to me. Just had a set of '75 Duster uppers in my hands and they don't look like yours. The first bushing bolt started had to be almost flush before there was enough room to start the other bolt. The ones you have look a bunch wider on the bushing end.

 

[Alaskan_TA]

I do not have them, so I can not measure them, the buddy with the shed is in CA.

I will ask him to do so.

Thanks,
Barry

 

[Mike Z]

They Look Identical to the arms on my 72 Duster. I just put them back on. The pitch and the contact for the rubber stop give it away

 

[Alaskan_TA]

Hey guys,
Here is a new photo with the measurement.

Thanks!

Barry

 

[crackedback]

Probably B or C body arms.

Too wide for A's.

 

[autoxcuda]

E-body arm picture and measurement I took years ago.

 

[6pk2goDemon]

Barry, Measured the upper a-arms on my 72 Demon while still on the car. So a bit tough to get totally accurate but......

7 3/4" from same points you are showing (inside of a-arm across)