As I've alluded over the last few months, I'm delighted to announce we can now do high temp ceramic coatings on headers and manifolds as an authorized dealer of Performance Coatings! It's available in either Performance Chrome, Stealth Black or Cast-Iron Gray at the same low price. There's even a three-year warranty.
Unfortunately, I'm not going to be able to offer much, if any, discounts on these coatings since the prices are already rock-bottom. Gift Certificates are exempt as well. As usual, the customer is responsible for shipping and insurance charges back and forth.
I've just added a lot more information and a separate ceramic price list to my website's Pricing and Shipping Tab about these coatings so you'll have it for future reference. Here's the rundown in the meantime.
Manifolds (cast iron)
4 cylinder.........................................$125.00
V-6/ 6 cylinder...................................$160.00
V-8 / 8 cylinder .................................$180.00
Headers
Up to 1 1/2" in diameter .....................$220.00
1 1/2" - 1 3/4" in diameter ..................$235.00
Larger than 1 3/4" in diameter .............$270.00
Block Huggers ..................................$165.00
Straight 6 ........................................$190.00
V-6 ................................................$210.00
4-cylinder ........................................$150.00
Cobra / Corvette
Sidepipes only ..................................$290.00
Headers and Sidepipes .......................$430.00
Turbos ..........................................$80.00-$150.00
Tune Port (manifold, plenum, runners) .........$165.00
(cannot coat throttle body)
Exhaust Tubing (5' maximum length) .......$26.00/ft.
Motorcycle Exhaust
4 into 1 ...........................................$150.00
2 into 1 ...........................................$130.00
Singles / Harleys ...............................$100.00
Ceramic coating cannot be applied over chrome. It will be your responsibility to remove any chrome plating before shipping your parts to us. Any chrome shop can do this for you.
Unfortunately, I'm not going to be able to offer much, if any, discounts on these coatings since the prices are already rock-bottom. Gift Certificates are exempt as well. As usual, the customer is responsible for shipping and insurance charges back and forth.
I've just added a lot more information and a separate ceramic price list to my website's Pricing and Shipping Tab about these coatings so you'll have it for future reference. Here's the rundown in the meantime.
HIGH TEMPERATURE CERAMIC HEADER AND MANIFOLD COATINGS PRICE LIST
You are Responsible for All Shipping and Desired Insurance Charges. These prices are subject to change without notice. Please call to verify pricing before shipping your exhaust components to our shop.
Manifolds (cast iron)
4 cylinder.........................................$125.00
V-6/ 6 cylinder...................................$160.00
V-8 / 8 cylinder .................................$180.00
Headers
Up to 1 1/2" in diameter .....................$220.00
1 1/2" - 1 3/4" in diameter ..................$235.00
Larger than 1 3/4" in diameter .............$270.00
Block Huggers ..................................$165.00
Straight 6 ........................................$190.00
V-6 ................................................$210.00
4-cylinder ........................................$150.00
Cobra / Corvette
Sidepipes only ..................................$290.00
Headers and Sidepipes .......................$430.00
Turbos ..........................................$80.00-$150.00
Tune Port (manifold, plenum, runners) .........$165.00
(cannot coat throttle body)
Exhaust Tubing (5' maximum length) .......$26.00/ft.
Motorcycle Exhaust
4 into 1 ...........................................$150.00
2 into 1 ...........................................$130.00
Singles / Harleys ...............................$100.00
Important ~ Parts Preparation:
All parts to be ceramic coated will be thermallly degreased and media blasted before coating. Parts that arrive heavily soiled or requiring additional surface preparation will be prepped for coating at an additional cost of $35.00.
It is your responsibility to disassemble all parts before shipping them to us. There will be an extra charge of at least $35.00 to disassemble any parts received by us that require further disassembly prior to coating. This also applies to headers that are in multiple sections (i.e., slip fit tubes).
All parts to be ceramic coated will be thermallly degreased and media blasted before coating. Parts that arrive heavily soiled or requiring additional surface preparation will be prepped for coating at an additional cost of $35.00.
It is your responsibility to disassemble all parts before shipping them to us. There will be an extra charge of at least $35.00 to disassemble any parts received by us that require further disassembly prior to coating. This also applies to headers that are in multiple sections (i.e., slip fit tubes).
Ceramic coating cannot be applied over chrome. It will be your responsibility to remove any chrome plating before shipping your parts to us. Any chrome shop can do this for you.
Please Note: * The 3-year warranty is null and void if you run the motor on a dyno. Stealth Black and Cast-Iron Gray are applied over Performance Chrome for double thermal protection at no extra charge. We recommend using only stainless steel hardware on your newly coated headers / manifolds, as well as on your valve covers above them. You are responsible for all shipping and desired insurance charges. These prices are subject to change without notice; please call to verify pricing before shipping your exhaust components to our shop.
