CFM on Strokers ???

[1320duster]

What Size Carb are you guys running on your strokers and state what size motor you ar running ,,I.E. 408/850 ???

 

[SRT_DSTRHOLC]

Old stye 950Hp would work well, along with New Style Holley Ultra HP 850

 

[FJ5]

408/870 street avenger

 

[draginmopars]

446ci / 950hp/ E-85

1050 on a 540 also E-85

 

[Kevin D.]

416 ci 825 mighty demon.

 

[moper]

870+ wet flowed cfm.

 

[BigBlockMopar]

1250 on 496"

 

[flyfish]

I'm in the minority, but.....410ci, 750dp on e85.

 

[rumblefish360]

Old stye 950Hp would work well, along with New Style Holley Ultra HP 850

870+ wet flowed cfm.

What size engines are your strokers with these carbs?
He did ask for your set up.

 

[moper]

Sorry - I read it as "408"... 4" stroke small blocks between 1.1 to 1.3hp/CI. Street or street/strip. Higher horsepower and higher rpm will respond well to larger carbs in most cases but it depends on the individual car combo.

 

[SRT_DSTRHOLC]

What size engines are your strokers with these carbs?
He did ask for your set up.

410 500-530hp

 

[stroker_valiant]

I believe I am in the minority Flyfish; Offenhauser tunnel ram with two Holley 450's on a 415ci....

 

[jimjimjimmy]

416 / 950hp

 

[clinteg]

950 HP on a 417

 

[jacksdodges]

I am running a 770 street avenger on my 416 driven on the street.

 

[rnaz]

390cid, 750cfm QuickFuel

 

[fishy68]

Holley 750 HP on a 408 (very mild 425-450 hp range). Also tried a 830 annular and a std 850 on it and it did seem to pull a little harder up top with both but the difference was pretty minor and fuel economy was terrible with both and that is a concern since we drive it a lot.