CLOCK?

-
SSing

SSing

Well-Known Member
Joined
Feb 24, 2012
Messages
1,097
Reaction score
333
Location
upland, sweden
Was gonna sell this clock (´68 Barracuda). Looks to be in very good shape, so I was a bit surprised, hands didn´t move when I turned the wire.
Is it clock needs power to kind of unlock hands?

Clock wire.jpg
 
That cable is to set the clock. The hands should move.
 
Professor Fate said:
Not familiar with them, but do you need to pull the knob out and then set the hands? (like a wristwatch)
Click to expand...
Yes have tried that but hard since wire is not secured to the dash.
But now I pushed and watched back side, and noticed leaver pushes the round thing and the tiny rod is pressed down.
Hands moved some but think this needs a tiny bit of oil.
(ooh my if I only could use my own language :))
Thank you. Think probleme is solved.

Clock back side.jpg
 
SSing said:
Yes have tried that but hard since wire is not secured to the dash.
But now I pushed and watched back side, and noticed leaver pushes the round thing and the tiny rod is pressed down.
Hands moved some but think this needs a tiny bit of oil.
(ooh my if I only could use my own language :))
Thank you. Think probleme is solved.

View attachment 1716209190
Click to expand...
Brother, you communicate a lot better in English than I would in Swedish that's for sure :thumbsup:
 
Yes, a little penetrating oil, push and turn the knob back and forth until it frees up.
 
You must log in or register to reply here.
-

Back
Top