closed chamber w2s

[1970 La]

has any of you used these heads with push rod oiling on a la block? i am going to stay with a solid camshaft and run amc lifters. flat top j&e pistons @ a 4.100 bore and 3.58 stroke. also have t&d rockers for these heads. just wondering about oil mods you may have used. will keep rpm under 7000.

 

[70aarcuda]

do those heads have the oiling thru the shafts available..?

 

[1970 La]

no these are the 65cc pro race head push rod oiling only.

 

[Brian Hafliger]

has any of you used these heads with push rod oiling on a la block? i am going to stay with a solid camshaft and run amc lifters. flat top j&e pistons @ a 4.100 bore and 3.58 stroke. also have t&d rockers for these heads. just wondering about oil mods you may have used. will keep rpm under 7000.

Just run a hollow pushrod and make sure the adjuster is not more than 2 1/2 turns down from seated position.
Is that the 47cc chamber head?

 

[1970 La]

ok thanks. these are 65cc