Anyone ever order parts from CNC Motorsports? They have Scat I beam rods with ARP 8740 bolts, rated at 700hp for $419, ARP 2000 bolts rated at 800hp for $477. I plan to go with the 2000 bolts for the extra insurance. I believe in overkill.
CNC Motorsports
- Thread starter srduster340
- Start date
-
coloradohill
Well-Known Member
I’ve ordered from them before.
They are great people to work with and prices are very competitive also.
I recommend them
They are great people to work with and prices are very competitive also.
I recommend them
Last edited:
We have a member, @PROSTOCKTOM who is a Molnar dealer. I bet he can give yall some deals on stuff.
IIRC he had some H beam small block rods for 499
Will those Molnar standard size rods clear with a 4"crank?
I've ordered a k1 crank and molnar rods from them in the past and had good experience with them
Scat I beams no clearance issues.
Molnar rods you will need to notch the bottom of the bores.Both are good rods.
Scat I beams no clearance issues.
Molnar rods you will need to notch the bottom of the bores.Both are good rods.
moparstud440
Well-Known Member
I ordered most of the parts for my wife's stroker from them about 5 years ago. I placed the order online and got a phone call from them either the same day or the next day. The .030 pistons I ordered weren't in stock and were like 2 months out at that time. They had .040 pistons in stock so I got those instead. I check their pricey regularly and would buy from them again.
dodgedifferent2
Well-Known Member
I got the Molnar 340 stroker rotating assembly from them.
Had no complaints and they swapped the .03 pistons for .04 pistons with no added cost, but this was probably 8-9 yrs ago
Had no complaints and they swapped the .03 pistons for .04 pistons with no added cost, but this was probably 8-9 yrs ago
Trying to see if Summit will match their prices. I'm only about 30 mins away.
-
