Terry8675309
Active Member
4 yrs....20k dollars....and a failed marriage..... I need HELP!!!!
I have 1970 Dart Swinger 318 bored .060
727 T flight tranny
MSD Digital E Curve Distributor w/ blaster coil.
QUESTION???
What are the cranking volts at the coil supposed to be.There are 12.85 present both sides of the coil before cranking. During cranking, the coil + drops to 10.8 volts. Coil - drops to .26 The Car will not fire. I have replaced and gapped Plugs. Re-Ran my alternator wires for 2 field. New Voltage Regulator as well as a Neutral safety switch because a melted the last one. I have checked for ground and power to each item in the Ignition System as well as the Starting System and Charging System****** I still get no spark.****** Battery was bench tested, as well as coil , Alternator, Voltage Regulator, and Relay Switch. All ohms are exteelmlyclose to the (Overall) specs. I am NOT currently using a Ballast Resistor.ALL the interior, lights, gauges ,and accessories were working correctly before my dizzy install. After the install I am missing the the power to the dash.
If you guys could help I would be gratefull!! Maybe then we can work out the marriage thing? Just Kiddn. Thanks for input.
I have 1970 Dart Swinger 318 bored .060
727 T flight tranny
MSD Digital E Curve Distributor w/ blaster coil.
QUESTION???
What are the cranking volts at the coil supposed to be.There are 12.85 present both sides of the coil before cranking. During cranking, the coil + drops to 10.8 volts. Coil - drops to .26 The Car will not fire. I have replaced and gapped Plugs. Re-Ran my alternator wires for 2 field. New Voltage Regulator as well as a Neutral safety switch because a melted the last one. I have checked for ground and power to each item in the Ignition System as well as the Starting System and Charging System****** I still get no spark.****** Battery was bench tested, as well as coil , Alternator, Voltage Regulator, and Relay Switch. All ohms are exteelmlyclose to the (Overall) specs. I am NOT currently using a Ballast Resistor.ALL the interior, lights, gauges ,and accessories were working correctly before my dizzy install. After the install I am missing the the power to the dash.
If you guys could help I would be gratefull!! Maybe then we can work out the marriage thing? Just Kiddn. Thanks for input.