Dodge65500 Member Joined Dec 7, 2015 Messages 21 Reaction score 2 Location Indiana Oct 17, 2016 #1 I'm turning a model into a convertible. What is the best way to create a boot for the top? Thanks in advance!
I'm turning a model into a convertible. What is the best way to create a boot for the top? Thanks in advance!
CUDA69 FABO Gold Member FABO Gold Member Joined Dec 4, 2008 Messages 705 Reaction score 136 Location New Jersey Oct 18, 2016 #2 Year One has them, but getting a boot is is probably the easiest part of this conversion. Do you have a donor car?
Year One has them, but getting a boot is is probably the easiest part of this conversion. Do you have a donor car?
68gtxman I used to reMember Joined Jul 11, 2011 Messages 4,943 Reaction score 4,110 Location Eastampton, NJ Oct 18, 2016 #3 Vinyl pool liner may be thin enough. Go to a fabric store and see what they might have.
R RedFish Well-Known Member Joined Sep 5, 2007 Messages 25,850 Reaction score 5,351 Oct 18, 2016 #4 I think a single piece of vinyl would look too add on. I would have to atleast attempt to whittle from a donor piece of plastic. Right now I'm looking at several possible donors on this Toshiba laptop.
I think a single piece of vinyl would look too add on. I would have to atleast attempt to whittle from a donor piece of plastic. Right now I'm looking at several possible donors on this Toshiba laptop.
jaws I put the fun in dysfunctional FABO Gold Member Joined Sep 11, 2006 Messages 6,162 Reaction score 6,922 Location Strasburg Colorado Oct 18, 2016 #5 way back when, when tooth paste tubes were aluminum or tin I used that. Maybe some heavy foil.
Dodge65500 Member Joined Dec 7, 2015 Messages 21 Reaction score 2 Location Indiana Oct 25, 2016 #6 Cool thanks guys!