couple Q'ssss

[Ryan426_]

does anyone know were too get rocker moulding clips for the 2inch wide moulding NOT the thin 1inch also looking for somone that sells gasket paint kits and non a/c firewall gasket and another im looking for rear 71 tailight rubber gaskets like originals not the little foam ones they sell now thanks for anything

 

[cudaspaz]

R/T specialties should have the clips.

Try year-none for the seals. make sure they have them in stock before ordering otherwise you may wait for a while.

 

[Ryan426_]

check r/t i didnt see duster rocker clips

 

[baucco]

I got my 2 inch S-Shaped spring clips for Susanne's Barracuda at my local Carquest shop. I'll stop in tomorrow and get the part number and supplier for you.

 

[1967DartGT]

What year is the rocker molding clip for? I've looked for the big rectangular clips that hold on the wide rocker moldings on my 67 dart. I've never found them advertised for the dart, but I believe they are the same clips used for the rocker moldings on 67 or 68? b-bodies. I thought I had a site bookmarked for those but can't find it. Try searching for b-body clips and you might find what you need.

 

[Ryan426_]

ok cool thanks they look like this these are off ebay but all i can find are people selling the thin moulding

 

[Ryan426_]

there on my '71 duster

 

[1967DartGT]

Try this place

www.jimsautoparts.com/clips.htm

 

[Ryan426_]

holy squirl turds batman $65.00

 

[1970duster440]

Here's where to get the gasket paint set. Good stuff.

http://www.detroitmuscletechnologies.com/

 

[AdamR]

Here's where to get the gasket paint set. Good stuff.

http://www.detroitmuscletechnologies.com/

Best place for gaskets hands down.

 

[2 Darts]

Mr. G's in Fort Worth, TX stocks a bunch of the odd clips and things. He advertises in most of the Mopar mags, although he isn't a Mopar specialty business.