crane cam 150062

[bigals71dart]

i have a basicly stock 318 with ebrock performer intake and matching 600cfm for barrell and was givin a 150062 camshaft and matching lifter kit will it help my stock engine or is it a waste to put cam in car without other mods thanks alan l

 

[rumblefish360]

Do you have the specs of the cam? Since looking them up @ Crane Cams is no longer possible.

 

[Toluene56]

rind Number:284 H12Operating Range:3000-6200 RPMDuration Advertised:284° Intake / 284° ExhaustDuration @ .050'' Lift:228° Intake / 228° ExhaustValve Lift w/1.5 Rockers:.480'' Intake / .480'' ExhaustLobe Separation Angle:112°Max Lift Angle:107° ATDC Intake / 117° BTDC ExhaustOpen/Close @.050'' Cam Lift:Intake - 7° BTDC (opens) / 41° ABDC (closes)
Exhaust - 51° BBDC (opens) / (3°) BTDC (closes

I think that would be a bit much for a stock 318..


something like this http://www.summitracing.com/parts/CCA-CL20-220-3/ would probably suite that engine a little better.. imo.

 

[waggin]

Grab a converter and some gear......you'd be surprised

rind Number:284 H12Operating Range:3000-6200 RPMDuration Advertised:284° Intake / 284° ExhaustDuration @ .050'' Lift:228° Intake / 228° ExhaustValve Lift w/1.5 Rockers:.480'' Intake / .480'' ExhaustLobe Separation Angle:112°Max Lift Angle:107° ATDC Intake / 117° BTDC ExhaustOpen/Close @.050'' Cam Lift:Intake - 7° BTDC (opens) / 41° ABDC (closes)
Exhaust - 51° BBDC (opens) / (3°) BTDC (closes

I think that would be a bit much for a stock 318..


something like this http://www.summitracing.com/parts/CCA-CL20-220-3/ would probably suite that engine a little better.. imo.

 

[rumblefish360]

Good find. How did you do that? At summit?

 

[Toluene56]

Grab a converter and some gear......you'd be surprised

I have no doubt that a good converter and some decent gears would make it scream. Just sayin if it's a tired 318.. might be better to upgrade a couple things with the cam. :thumblef:

Good find. How did you do that? At summit?

eh.. actually summit isn't very good for specs.. But for some reason jegs still has all the specs for the crane cams.


Crane is back..but their website is still lacking.

 

[Badart]

New valve springs also.

 

[Toluene56]

Most definately.