[WANTED] Dart Duster Cuda

[1969cuda340]

Hi. I’m looking for a set of bumper guards front and rear for a 70 Dart. Always looking for 73-74 Duster parts and 69 Cuda parts. Thanks

 

[barracudakid]

I have Barracuda parts

 

[1969cuda340]

Nos inner fenders? Anything like that ? Thanks

 

[barracudakid]

I do not

 

[1969cuda340]

I do not

Anything nos or very good

 

[Penstarpurist]

I'm parting out a 73 duster /6 automatic factory a/c car. Let me know what you need, I may have it.

 

[Bodyperson]

I parted out a 72 swinger. Same thing? I have bumper guards from it along with other trim.

 

[1969cuda340]

I need the piece between the sill plates and rear panels about 6in long and two inches wide. Bench seat hinge covers and k

I'm parting out a 73 duster /6 automatic factory a/c car. Let me know what you need, I may have it.

i also need the screws for the fuel fill behind gas cap and the boot that covers tank fill

 

[Penstarpurist]

The sill plate extensions I got, only have the passenger side seat hinge cover. Driver side is not good. Same with the sail panels. Passenger side is good, driver side broken where it passes under rear side glass. Screws for fill neck definitely have. I'll try and get the rubber boot out without tearing it up. But got that for sure in a few different cars. I'll get it all out and pictures for you in a day or two. Have to go in with some wasp/yellow jacket spray first.

 

[1969cuda340]

The sill plate extensions I got, only have the passenger side seat hinge cover. Driver side is not good. Same with the sail panels. Passenger side is good, driver side broken where it passes under rear side glass. Screws for fill neck definitely have. I'll try and get the rubber boot out without tearing it up. But got that for sure in a few different cars. I'll get it all out and pictures for you in a day or two. Have to go in with some wasp/yellow jacket spray first.

Ya I got stung twice last week little basterds No hurry

 

[Penstarpurist]

My hand and wrist look deformed right now. Lol, I had to pick the stinger out. Got in between my glove and coat. Laid into me.

 

[1969cuda340]

The sill plate extensions I got, only have the passenger side seat hinge cover. Driver side is not good. Same with the sail panels. Passenger side is good, driver side broken where it passes under rear side glass. Screws for fill neck definitely have. I'll try and get the rubber boot out without tearing it up. But got that for sure in a few different cars. I'll get it all out and pictures for you in a day or two. Have to go in with some wasp/yellow jacket spray first.

That’s what I need. The missing trim

 

[1969cuda340]

My hand and wrist look deformed right now. Lol, I had to pick the stinger out. Got in between my glove and coat. Laid into me.

Damn I’m sorry. I’m in no hurry don’t get stung again. Send me some car pictures maybe I’ll buy more. Where do you live

 

[Penstarpurist]

I'm located in n.e Salem Oregon myself. Looking at the pictures are you wanting the plastic door jam edging or the metal sill plate itself? The pics of the sill trim is what my question is on. There are obviously the two long ones for the floor entry sill then the two short metal pieces are the ones that extend from the long sill plates to the back panels. These are the pieces I think you are looking for. The two shorts. The tan elbow shaped piece is the passenger seat hinge cover. I posted just a few pics of what I've pulled so far. Most of what's on the shop sofa is off of one of the 1975 valiant 4 door cars I have. I have multiple A body card that I will be completely parting out. I will post everything on the fabo sellers pages. But if you have any questions or parts you need feel free to p.m on them.

 

[1969cuda340]

I'm located in n.e Salem Oregon myself. Looking at the pictures are you wanting the plastic door jam edging or the metal sill plate itself? The pics of the sill trim is what my question is on. There are obviously the two long ones for the floor entry sill then the two short metal pieces are the ones that extend from the long sill plates to the back panels. These are the pieces I think you are looking for. The two shorts. The tan elbow shaped piece is the passenger seat hinge cover. I posted just a few pics of what I've pulled so far. Most of what's on the shop sofa is off of one of the 1975 valiant 4 door cars I have. I have multiple A body card that I will be completely parting out. I will post everything on the fabo sellers pages. But if you have any questions or parts you need feel free to p.m on them.
View attachment 1715221117 View attachment 1715221118 View attachment 1715221119

The two shorts is what I need
The bolts for the bottom of column to firewall (there are 3) and correct screws for gas fill on quarter and for the boot in trunk. How is that grill?

 

[1969cuda340]

The two shorts is what I need
The bolts for the bottom of column to firewall (there are 3) and correct screws for gas fill on quarter and for the boot in trunk. How is that grill?

I’ll take the license plate holder and possibly the front bumper brackets if you still have them. Thanks for helping me out. I just had surgery on a knee I hurt in Afghanistan and I can’t walk yet.

 

[Penstarpurist]

The grill is not in great shape. It's all there less one chip/chunk missing. It's where it mounts to the core support that its broken and zip tied in. Like I said, all there. But would need repair work. I've got several front grills. The best one I will be putting on my car. But would sell the others that are in equal or better shape. I've posted pics of the one on the parts car, as well as the liscence plate bracket and column to firewall bolts.

 

[1969cuda340]

The grill is not in great shape. It's all there less one chip/chunk missing. It's where it mounts to the core support that its broken and zip tied in. Like I said, all there. But would need repair work. I've got several front grills. The best one I will be putting on my car. But would sell the others that are in equal or better shape. I've posted pics of the one on the parts car, as well as the liscence plate bracket and column to firewall bolts. View attachment 1715221141View attachment 1715221140 View attachment 1715221139 View attachment 1715221138 View attachment 1715221137 View attachment 1715221136 View attachment 1715221135

Seat belts. Can I call you tomorrow

 

[Penstarpurist]

Yes. I'll p.m you my info.

 

[Penstarpurist]

Your inbox is full. P.m if you like or let me know when yours is able to take messages.

 

[1969cuda340]

Your inbox is full. P.m if you like or let me know when yours is able to take messages.

Clear