73 408 Duster
Well-Known Member
Contact seller
Deal of the year for someone who is willing to come and pick it all up in a timely manner in San Marcos, CA! Abandoned Rust Free Duster project, cheap!
As luck would have it I have gotten laid off from my job and my 73' Duster project must go. I am getting rid of everything Mopar related that I own until things improve. If I can't afford to work on it I don't want it sitting around idle.
To make this easy I am going to break this up in two groups, #1 and #2. I will take cash onsite or Paypal for payment. Would like all of it gone no later than the end of January-2014, the sooner the better.
FAQ's:
Yes, you get the dolly for transfer as there is no drivetrain left.
Yes, this is a HUGE project and not for the faint of heart, this car was going to be a drag car so a mini tub was started.
Yes, I have a clear CA title for it in my name.
Yes, you will need a truck and trailer and be willing to pick up in 92078.
Yes, the areas damaged or rusted have been cut out, new patches go with the sale and will need welded in.
No, it is not a complete car and you will need to build it.
No, I will not help you with putting it together.
No, I am not parting it out, only selling it together or broken up into groups 1 and 2.
Included in #1:
Everything pictured including the stripped car body, new patch panels and all the other parts that I have for it pictured. Sale will not include the motor, two transmissions, and associated engine parts. For this I would like $600.00 OBO paid via Paypal or Cash. If paid and picked up expeditiously I even have a new gallon of high end epoxy primer and hardener that I will throw in.
Included in #2:
Some components needed for a 451 stroker build, to include:
The 400 block which has been magnafluxed and bored .060" over by Mesa machine, the matching Keith black hyper pistons, the old 400 rods and pistons, the old 400 cast crank, a 440 forged crank, Edelbrock valve covers, exhaust wrap, magnetic drain plug, spark plug wire dividers, and two complete big block Mopar transmission cores. For this I would like $600.00 OBO paid via Paypal or Cash. If paid expeditiously I will throw in the heavy duty engine stand pictured with the sale as a bonus.
If you want everything together, I will knock $200.00 off and accept $1,000 OBO paid via Paypal or Cash. First "I will take it" in this thread or a PM and who pays for it gets it all. This is a great find for someone as my asking prices are far lower than the value. Good luck, enjoy the pictures via the link below!
[ame="http://www.flickr.com/photos/113511057@N08/sets/72157639407835525/"]73 Duster - a set on Flickr[/ame]
As luck would have it I have gotten laid off from my job and my 73' Duster project must go. I am getting rid of everything Mopar related that I own until things improve. If I can't afford to work on it I don't want it sitting around idle.
To make this easy I am going to break this up in two groups, #1 and #2. I will take cash onsite or Paypal for payment. Would like all of it gone no later than the end of January-2014, the sooner the better.
FAQ's:
Yes, you get the dolly for transfer as there is no drivetrain left.
Yes, this is a HUGE project and not for the faint of heart, this car was going to be a drag car so a mini tub was started.
Yes, I have a clear CA title for it in my name.
Yes, you will need a truck and trailer and be willing to pick up in 92078.
Yes, the areas damaged or rusted have been cut out, new patches go with the sale and will need welded in.
No, it is not a complete car and you will need to build it.
No, I will not help you with putting it together.
No, I am not parting it out, only selling it together or broken up into groups 1 and 2.
Included in #1:
Everything pictured including the stripped car body, new patch panels and all the other parts that I have for it pictured. Sale will not include the motor, two transmissions, and associated engine parts. For this I would like $600.00 OBO paid via Paypal or Cash. If paid and picked up expeditiously I even have a new gallon of high end epoxy primer and hardener that I will throw in.
Included in #2:
Some components needed for a 451 stroker build, to include:
The 400 block which has been magnafluxed and bored .060" over by Mesa machine, the matching Keith black hyper pistons, the old 400 rods and pistons, the old 400 cast crank, a 440 forged crank, Edelbrock valve covers, exhaust wrap, magnetic drain plug, spark plug wire dividers, and two complete big block Mopar transmission cores. For this I would like $600.00 OBO paid via Paypal or Cash. If paid expeditiously I will throw in the heavy duty engine stand pictured with the sale as a bonus.
If you want everything together, I will knock $200.00 off and accept $1,000 OBO paid via Paypal or Cash. First "I will take it" in this thread or a PM and who pays for it gets it all. This is a great find for someone as my asking prices are far lower than the value. Good luck, enjoy the pictures via the link below!
[ame="http://www.flickr.com/photos/113511057@N08/sets/72157639407835525/"]73 Duster - a set on Flickr[/ame]