I actually just pulled those on mine two days ago and they are a pain. You have to be determined because if you are delicate they never will move. I found if you can get the top to release by pulling down and inward first to get it off the roof lip you will have a chance. Then you have to get it to move up and forward on the bottom and all the while the window latch gives not an ounce of extra room. It will come out with a fight, so do not be afraid to get a flat screwdriver in between the panel and the package tray/seat back area to encourage the panel a little. That was the most I did with tools but that was not the total solution. It’s a battle of willpower that gets that thing out. You will hear scraping metallic sounds getting it out, so do not fear that. But it is a job mainly done caveman style lol. Good luck.