Do they make a complete disc break conversion for a 69 Dart

-
I want to upgrade my Fathers 69 dart from drums to disc's. Are there any complete packages out there?
Thanks

You want to just change the front to disc or all four corners. Do you want to keep the small bolt pattern wheels or is going to it bolt ok?
 
Yes, many setups and many posts here, and many choices to make (SBP or BBP). Scarebird's setup is cheapest and simplest, assuming you won't remove your spindles and control arms for other things (new bushings). You can also keep your SBP wheels with it. Wilwood allows either SBP or BBP in the same hub (thus can change later), but is quite expensive. It also works with your existing spindle and control arms.

Most posts here suggest getting the 1973+ BBP disk setup, but used parts are getting rare and expensive. You can buy all new parts (ebay), but almost as costly as Wilwood, for an older heavier design, and it depends on being able to buy the integral rotor/hub in the future.
 
SSBC make a nice set. It has dual bolt patterns so you can keep the 5x4 pattern 14" wheels.
 
-
Back
Top