Im having trouble aligning my doors, iv'e searched the web but I seem to be a bit confused. I also have a manual which iv'e read but, again im not too sure.
I took the doors off a while ago to get it ready to paint, I also removed all the weather striping, i tried putting the doors back on, and at first i was having lots of trouble but then I read my manual and so from what i read I put a piece of wood and a jack under the door. unbolted the outside bolts on the upper and lower hinges, jacked it up then tightened the 2 bolts. the door is higher now, but the top comes in too much and the bottom sticks out too much.
I have the opposite issue on the other side.
if anyone can help me out that would be great!!
car is a 68 dodge dart
I took the doors off a while ago to get it ready to paint, I also removed all the weather striping, i tried putting the doors back on, and at first i was having lots of trouble but then I read my manual and so from what i read I put a piece of wood and a jack under the door. unbolted the outside bolts on the upper and lower hinges, jacked it up then tightened the 2 bolts. the door is higher now, but the top comes in too much and the bottom sticks out too much.
I have the opposite issue on the other side.
if anyone can help me out that would be great!!
car is a 68 dodge dart