Door Handles

[Dizzydean]

So I watched this build-it-show and they changed a set of door handles on a gm car. It actually looked real good and they were very detailed oriented through the process. So I figure since Im still doing body work why not. Any ideas on what years of cars flush door handles wil fit a 67 dart? Thanks for all the help so far. Dean

 

[btroxler]

I an actually doing the conversion a we speak. I have the handles as well as a section of the door off a S10. I like the idea of a flush handle and also they can be body colored as I am eliminating the chrome and any chrome accents will either be body color or blacked out

 

[FISHBREATH]

I believe I saw the same show. They pointed out to ensure that the actuator connectors of the new latches mate up with the actuator rods at or near the original location so as to avoid interference with internal door structures.

 

[Riddler]

The challenger and charger have some great flush mount style handles.

Riddler

 

[blue missile]

I used nissan pathfinder handles.
Andrew

 

[mopardrt]

those still look so sweet looks factory

 

[USCG CHARGER]

Has anyone else done this?

 

[76orangewagon]

I attached a link, I did this back in August.there off a GM..

http://www.forabodiesonly.com/mopar/showpost.php?p=1493177&postcount=488

 

[USCG CHARGER]

I attached a link, I did this back in August.there off a GM..

http://www.forabodiesonly.com/mopar/showpost.php?p=1493177&postcount=488

how did the linkages line up and work with the original stuff?

 

[76orangewagon]

how did the linkages line up and work with the original stuff?

had to get Rod and bend my own, a little heat and they bend real easy.