So on the driver side of the 66 ddart, if I want to push the little triangle vent window open, it hits the side view mirror after about 1 inch. Hummm,,, is that how the car was designed? Do I have to move the mirror out of the way, then open the window, then readjust the mirror? I am using the original mirror....i think. Anyone else testify to this?
I had that problem on my 69 Valiant. I rotated the mirror head, which was anchored off center, and that solved the problem. -- My mirror was the original stock mirror, in the factory position. -- Possibly your mirror is the same.
Sounds like something's wrong. The mirror shouldn't interfere with the window opening...:scratch: Here's a 66 with the original twin post mirror in the factory location.
Hummm, well I tried rotating it 180 but no difference. So maybe you can take a look at my setup and tell me if I have the wrong mirror? Is mine supposed to be round? or rectangle?
You were supposed to rotate the mirror, NOT the whole car. Looks like your mirror is too far back on the door by about 6 inches to me.
Mirror looks like it is to far back like others mentioned .... all pics I have seen look like they are suppose to be closer to the front where the vent window starts
Go to google images and look at most of your Make and model. An easy fix is to mount it with a magnet.
Should be the round twin post mirror. My wagon had a square mirror on it and found out when I removed it, the mirror was a Ford mirror!
