Dual Master Cylinder for '65 Dart

[SparkyDoo333]

I'm looking to swap to dual master cylinders for my 1965 Dart so it'll be more safe to drive. I found one made be JEGS online, but I'm not sure whether it's the best one. It says that it works for the car, but I wanted to come on here and see if there are some better options for dual master cylinders that wont break the bank.
JEGS 631405K Brake Master Cylinder and Adapter Plate Kit 1962-1974 Mopar A B & E | eBay

 

[Murray]

Do you have front discs?

 

[SparkyDoo333]

Do you have front discs?

I have drums all around.

 

[junkyardhero]

I have drums all around.

just get a drum/drum master from a 67+ car.

you'll need a distribution block or to cobble together the connections and then add a little plumbing.

or you can buy all the stuff new and scab it in.

 

[66Valiant528]

67 Valiant drum master cylinder. Just plumb the line for the front brakes into the present splitter and block the port for the rear brakes. Run the line for the rear brakes directly to the master.

 

[66Valiant528]

I did buy a set of prebent lines from Inline tubes and there splitter. There splitter was unlike anything ive ever seen with 1 line coming out the side! I had to make a bracket. I asked if they sold a line for this splitter set up, which they do not. You really don't need it.

 

[RustyRatRod]

Yeah, it'll work, but there's no need for "all that" when you can just get the correct master cylinder to begin with as mentioned.