Early 273 4bbl Intake needed

[Propower engines]

Hey guys I am looking for an early 273 cast iron 4bbl intake. This is for the heads that use 5/16'' bolts to hold it down.
Any leads would be greatly appreciated.
Dave
dave_conway@telus.net

 

[swing69]

You need the 65 and earlier. I've got one...still attached to a good 273 motor. $325 and you get it all. In NJ though.....

 

[65Val]

Hey guys I am looking for an early 273 cast iron 4bbl intake. This is for the heads that use 5/16'' bolts to hold it down.
Any leads would be greatly appreciated.
Dave
dave_conway@telus.net

Dave...Glad to see you on the board.The 472 is running great! I'll keep my eyes open for you.

 

[Propower engines]

Hey Swing69
PLEEEEEEse would you seperate the intake from the engine you have?? If so let me know what you want for it. NJ is no problem for shipping. Should go USPS it is not that heavy PM me or my email is in my original post. I really need it to finish a customers engine off.
Thanks
Dave

 

[Propower engines]

Dave...Glad to see you on the board.The 472 is running great! I'll keep my eyes open for you.

Thanks Darwin I was going to call you about this as I thought either you or J-rod would know of something. called Chris at vat but he did not have one he would part with right away and peter I had not called so maybe I may get lucky there.:burnout:
Thanks for keepin an eye out
Dave

 

[swing69]

Hi Dave,
I'll think about seperating it. But its tough to find them, as you know. I hate like hell to seperate, since most people would NEED the intake on the motor.

Maybe I'll part out the entire thing. PM me a good offer with shipping...and we'll talk.
Mike

 

[bamacuda]

Let me peruse the garage, I had one for upgrading my 2 bbl motor, until I found out it is a later 318 so bolt angle is wrong for me. I would like to get a decent performer RPM or similar for my 318. Do you have anything like this and want to trade?

 

[dart4forte]

How about a D4B?

 

[bamacuda]

Dave,
I found the 2465726 4 bbl early 273 intake that I said was possibly in my garage. Let me know if you are interested. Me, I'd like a edelbrock performer RPM or similar for my 318. Trade?
David

 

[Propower engines]

Thanks guys for the replies
but the customer has changed him mind and wants aluminum. I am going to re-machine a later style intake he found.To all of you that have found one there is an other post looking for same
Dave

 

[65Val]

[n/m